Tanaka ECV-4501 manual Starting cold engine -2,2B, 3,4,4B, Chain OIL -1 B, Starting Warm Engine

Page 7

 

 

 

ECV-4501

 

 

 

 

 

 

Owner’s Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHAIN OIL (Fig. 2-1 B)

 

 

 

Fill the chain oil reservoir (2). Always use good quality

 

 

 

chain oil. When the engine is running, the chain oil is

 

 

 

automatically discharged.

 

 

 

WARNING!

 

 

 

When the engine starts with the throttle lock

 

 

 

engaged, the engine speed is high enough to make

 

 

 

the chain rotate.

 

 

 

NOTE!

 

 

 

 

 

When pouring fuel (1) or chain oil (2) into the tank,

 

 

 

place the unit with cap side up. (Fig. 2-1B)

ADJUSTMENT OF CHAIN OIL SUPPLY

( i 2

)

 

 

 

 

The chain oil quantity discharged through the lubrication system is factory-adjusted to the maximum. Adjust the quantity in accordance with the operating condition.

Turn the adjusting screw (1) counterclockwise to decrease the quantity and turn it clockwise to increase the quantity. (Fig. 2-1 C)

Do not try to turn the screw beyond level marks.

Starting cold engine (Fig. 2-2,2B, 3,4,4B)

CAUTION!

Before starting, make sure chain brake is disengaged (if so equipped) and that the Bar/chain does not touch anything.

1 . Set ignition switch (1) to ON position.

*Push decompression valve (1) (if so equipped). This valve will return when engine started. (Fig. 2-2B)

2.Pull choke knob fully to choked position. This will automatically lock the throttle in starting position. (Fig. 2-3)

3.Pull recoil starter slowly until you feel compression resistance, and then pull briskly, taking care to keep the handle in your grasp and not allowing it to snap back. (Fig.2-4)

4.When you hear the engine want to start, with the safety trigger (1) pressed, pull throttle trigger (2). This will release the throttle from starting position to run position and will return the choke knob to run position automatically (Fig. 2-4B)

5.Pull recoil starter briskly again in the fore mention manner.

NOTE!

If engine does not start, repeat procedures from 2 to 5.

6.After starting engine, pull throttle trigger to release throttle lock. Then allow the engine about 2-3 minutes to warm up before subjecting it to any load.

Starting Warm Engine

1.Set ignition switch to ON position. Press decompression valve and pull recoil starter.

2.If engine does not start easily, press decompression valve again, pull choke knob fully and return it. This will lock the throttle in starting position. Pull recoil starter.

www.tanakapowerequipment.com

6

custsvc@tanaka-ism.com

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ECV-4501 Before using this unit ECV-4501 Operator Safety Proper Tension is Extremely IMPORTANT! -4 Assembly proceduresFuel Operating procedures Fuel FigFueling Starting Warm Engine Adjustment of Chain OIL SupplyStarting cold engine -2,2B, 3,4,4B Chain OIL -1 BStopping Fig Chain brake operation Optional FigChain Catcher ECV-4501 Basic Rules for Felling Trees FellingLimbing If the SAW Gets Stuck Thick LOG, Larger than Guide BAR LengthCross Cutting LOGS, Pressure on Bottom Thick LOG, Larger than Guide Bars LengthCarburetor adjustment Fig MaintenanceIdle speed adjustment T Air filter Fig Cleaning the air filterSpark plug Fig Fuel filter Fig Oiler port FigGuide bar Fig Side case FigIcing protection system -12,12B Decompression valve FigChain Sharpening Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceSpecifications V001001 Model Number BAR Number LENGTH-TYPE Chain Number Bar & Chain USA and Bar & Chain Canada

ECV-4501 specifications

The Tanaka ECV-4501 is a sophisticated piece of equipment designed to meet the demands of modern industrial applications, particularly in construction and heavy machinery sectors. Known for its reliability and versatile functionality, the ECV-4501 stands out due to its innovative features and cutting-edge technologies.

One of the main features of the Tanaka ECV-4501 is its powerful engine. Equipped with a high-performance 4-stroke engine, it delivers outstanding torque and efficiency, allowing for rapid completion of tasks without compromising on power. This robust engine is complemented by an advanced cooling system that ensures consistent performance even in the most demanding environments.

The ECV-4501 is built with user-friendly controls that improve operator efficiency. The ergonomic design includes a well-structured dashboard that displays essential information at a glance, allowing operators to monitor the machine’s status easily. The intuitive control panel enhances usability, making it suitable for both experienced operators and newcomers.

In terms of safety features, the Tanaka ECV-4501 incorporates multiple systems designed to protect the operator and the machinery. Safety guards are strategically placed to minimize risks during operation, while automatic shut-off systems are in place to prevent overheating and mechanical failures. These features contribute to a work environment that prioritizes safety and reliability.

The Tanaka ECV-4501 also excels in its technological integration. It is equipped with advanced sensors and diagnostics tools that allow for real-time monitoring of the machine’s performance. This connectivity not only assists in predictive maintenance but also helps in identifying potential issues before they lead to downtime.

Another notable characteristic of the ECV-4501 is its compact design. Unlike many machines in its class, the ECV-4501 can easily maneuver in tight spaces, making it ideal for urban construction sites and other confined environments. Its lightweight chassis does not sacrifice durability, as it is constructed with high-grade materials that withstand the rigors of daily use.

In summary, the Tanaka ECV-4501 is a remarkable blend of power, efficiency, and innovation. Featuring a robust engine, user-friendly controls, comprehensive safety systems, and advanced technology integration, it is designed to meet the high standards of modern industrial demands. Whether for large-scale projects or smaller tasks, the ECV-4501 is a reliable choice for professionals seeking a versatile and effective machine.
Top Page Image Contents