Tanaka ECV-4501 manual Limbing

Page 11

ECV-4501

LIMBING

Limbing is removing the branches from a felled tree.

WARNING!

A majority of kickback accidents occur during limbing.

Owner’s Manual

Do not use the nose of the guide bar. Be extremely cautious and avoid contacting the log, other limbs or objects with the nose of the guide bar. Be extremely cautious of limbs under tension. They can spring back towards you and cause loss of control resulting in injury. (Fig. 2-7G)

Stand on the left side of the trunk. Maintain a secure footing and rest the saw on the trunk. Hold the saw close to you so that you are in full control of it. Keep well away from the chain.

Move only when the trunk is between you and the chain. Watch out for spring back of limbs under tension.

LIMBING THICK BRANCHES

When limbing thick branches, the guide bar may get pinched easily. Branches under tension often snap up, so cut troublesome branches in small steps. Apply the same principles as for cross cutting.

Think ahead and be aware of the possible consequences of all your actions.

CROSS CUTTING/BUCKING

Before starting to cut through the log, try to imagine what is going to happen. Look out for stresses in the log and cut through it in such a manner that the guide bar will not get pinched.

CROSS CUTTING LOGS, PRESSURE ON TOP

Take a firm stance. Begin with an upper cut.

Do not cut too deeply-about 1/3 of the log diameter is enough.

Finish with a bottom cut. The saw cuts should meet. (Fig. 2-7H)

www.tanakapowerequipment.com

10

custsvc@tanaka-ism.com

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ECV-4501 Before using this unit ECV-4501 Operator Safety Proper Tension is Extremely IMPORTANT! -4 Assembly proceduresFueling Operating procedures Fuel FigFuel Starting Warm Engine Adjustment of Chain OIL SupplyStarting cold engine -2,2B, 3,4,4B Chain OIL -1 BChain Catcher Chain brake operation Optional FigStopping Fig ECV-4501 Basic Rules for Felling Trees FellingLimbing If the SAW Gets Stuck Thick LOG, Larger than Guide BAR LengthCross Cutting LOGS, Pressure on Bottom Thick LOG, Larger than Guide Bars LengthIdle speed adjustment T MaintenanceCarburetor adjustment Fig Spark plug Fig Cleaning the air filterAir filter Fig Fuel filter Fig Oiler port FigGuide bar Fig Side case FigIcing protection system -12,12B Decompression valve FigChain Sharpening Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceSpecifications V001001 Model Number BAR Number LENGTH-TYPE Chain Number Bar & Chain USA and Bar & Chain Canada

ECV-4501 specifications

The Tanaka ECV-4501 is a sophisticated piece of equipment designed to meet the demands of modern industrial applications, particularly in construction and heavy machinery sectors. Known for its reliability and versatile functionality, the ECV-4501 stands out due to its innovative features and cutting-edge technologies.

One of the main features of the Tanaka ECV-4501 is its powerful engine. Equipped with a high-performance 4-stroke engine, it delivers outstanding torque and efficiency, allowing for rapid completion of tasks without compromising on power. This robust engine is complemented by an advanced cooling system that ensures consistent performance even in the most demanding environments.

The ECV-4501 is built with user-friendly controls that improve operator efficiency. The ergonomic design includes a well-structured dashboard that displays essential information at a glance, allowing operators to monitor the machine’s status easily. The intuitive control panel enhances usability, making it suitable for both experienced operators and newcomers.

In terms of safety features, the Tanaka ECV-4501 incorporates multiple systems designed to protect the operator and the machinery. Safety guards are strategically placed to minimize risks during operation, while automatic shut-off systems are in place to prevent overheating and mechanical failures. These features contribute to a work environment that prioritizes safety and reliability.

The Tanaka ECV-4501 also excels in its technological integration. It is equipped with advanced sensors and diagnostics tools that allow for real-time monitoring of the machine’s performance. This connectivity not only assists in predictive maintenance but also helps in identifying potential issues before they lead to downtime.

Another notable characteristic of the ECV-4501 is its compact design. Unlike many machines in its class, the ECV-4501 can easily maneuver in tight spaces, making it ideal for urban construction sites and other confined environments. Its lightweight chassis does not sacrifice durability, as it is constructed with high-grade materials that withstand the rigors of daily use.

In summary, the Tanaka ECV-4501 is a remarkable blend of power, efficiency, and innovation. Featuring a robust engine, user-friendly controls, comprehensive safety systems, and advanced technology integration, it is designed to meet the high standards of modern industrial demands. Whether for large-scale projects or smaller tasks, the ECV-4501 is a reliable choice for professionals seeking a versatile and effective machine.
Top Page Image Contents