Williams Sound TGS SYS A manual Operating Instructions, Receiver Operation

Page 6

Operating Instructions:

(Step 1) Install the battery in the Transmitter. A 9V alkaline battery is included with the transmitter. If you are using a 9 Volt rechargeable battery, see page 6. Open the battery door on the Transmitter by lifting the battery door up. A coin may be used to help open the bat- tery door. Carefully insert the battery, observing proper polarity. The large battery termi- nal (-) is nearest the top of the compartment.

DO NOT FORCE THE BATTERY IN BACKWARDS. DAMAGE TO THE TRANSMITTER WILL RESULT!

Close the battery door by snapping it shut. If you are using a disposable battery, use only 9V alkaline batteries (Eveready 522 or equiv.). A disposable battery should last 15 hours. A BAT 003 re-chargeable battery will last about 3 hours per charge.

Large terminal (-)

Battery Installation

(Step 2) Plug the microphone into the "MIC/CHG" jack on top of the Transmitter. The Headset Microphone boom should be positioned as close to the wearer's mouth as possible with- out actually touching. Lapel Clip microphones should be attached to a collar or lapel, as close to the wearer's mouth as possible.

(Step 3) The Transmitter can be placed in a pants pocket or clipped onto a belt or waistband in the Belt Clip Case included with the Transmitter.

NOTE: The microphone cord is the transmitting antenna. Do not bunch it up or wrap it around the transmitter. Allow it to hang as straight as possible.

(Step 4) Turn the Transmitter on by moving the slide switch on top of the Transmitter to "ON."

To conserve battery life, there is no indicator light. Make sure you turn the Transmitter off when it is not in use to conserve the battery.

Receiver Operation:

(Step 1) Install the battery in the Receiver. A 9V carbon battery is included with each receiver. If you are using a rechargeable battery, see page 6. Open the battery door on the Receiver by lifting the battery door up. A coin may be used to help open the battery door. Carefully insert the battery, observing proper polarity. The large battery terminal (-) is nearest the top of the compartment.

DO NOT FORCE THE BATTERY IN BACKWARDS. DAMAGE TO THE RECEIVER WILL RESULT!

Close the battery door by snapping it shut. If you are using a disposable battery, you can use 9V carbon or alkaline batteries. A disposable carbon battery (Eveready 216 or equiv.) should last 15 hours. A disposable alkaline battery (Eveready 522 or equiv.) should last about 32 hours. A BAT 003 rechargeable battery will last about 6 hours per charge.

(Step 2) Plug the headphones or earphone into the "EAR/CHG" jack on top of the Receiver.

(Step 3) Turn the Receiver on by rotating the volume control wheel. Adjust the volume to a com- fortable level.

Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual and User Guide Contents Williams Sound CorpIntroduction Microphones Headphones and Earphones Optional Headphones and EarphonesEarpad Care Operating Instructions Receiver OperationBattery Life Hints for Using the SystemUsing Multiple Systems for Multiple Groups Rechargeable BatteriesBattery Charging Instructions ChargersInstructions for the R7-4 Multi-Channel Receivers Re-Tuning the Tour Guide SystemT16 Transmitter Frequency Change Procedure Radio InterferenceSetting the Transmitter Frequency Receiver Frequency Change Instructions R7YCase of Difficulty Warranty FM Tour Guide System Specifications Page Williams Sound Corp

TGS SYS A specifications

The Williams Sound TGS SYS A is a cutting-edge assistive listening system designed to enhance the audio experience for individuals with hearing impairments. This system is particularly beneficial in environments such as theaters, conference rooms, and places of worship, where clear sound is crucial for participation and understanding.

One of the standout features of the TGS SYS A is its versatility. The system is equipped with easy-to-use transmitters and receivers, allowing users to enjoy high-quality audio without the need for complex setup. It utilizes a radio frequency (RF) transmission technology, which ensures reliable sound delivery even in larger venues. This eliminates many of the common challenges associated with assistive listening devices, such as interference and limited range.

The TGS SYS A includes a variety of components tailored to different listening needs. The system typically features a transmitter that can interface with a microphone or audio source, allowing for seamless connection to various sound systems. Coupled with lightweight, ergonomically designed receivers, users can experience enhanced clarity and volume, making it easier for them to engage with the audio content being presented.

Another significant characteristic of the Williams Sound TGS SYS A is its commitment to user comfort and convenience. The receivers are often equipped with adjustable volume controls and can accommodate users wearing hearing aids, thanks to the built-in telecoil capability. This means that individuals can maximize their existing technology while benefiting from the additional amplification provided by the system.

Durability and build quality are also points of excellence for the TGS SYS A. The components are constructed to withstand the rigors of daily use, making them ideal for both temporary setups and permanent installations. Furthermore, they are designed for easy maintenance, ensuring that venues can provide reliable assistive listening services without frequent disruptions.

The TGS SYS A is also adaptable to various settings, catering to a diverse array of individuals and groups. Its straightforward operation ensures that both users and facilitators can engage with the system comfortably, fostering a more inclusive environment.

In conclusion, the Williams Sound TGS SYS A stands out as a robust solution for assistive listening needs. With its user-friendly design, exceptional audio performance, and adaptability to numerous environments, it represents a significant advancement in making sound more accessible to everyone.
Top Page Image Contents