Case of Difficulty | Williams Sound TGS SYS A specification

Step 5: Locate the Tuning Coil. (See figure on previous page). Each tuning coil is a small, square, shiny metal can with a screwdriver slot in a tuning slug in the top center. The Tuning Slug is usually black or gray.

Step 6: With the earphone or headphone supplied with the receiver plugged into the Ear Jack, turn the volume control to a comfortable level, and lis ten for the transmitted signal.

Step 7: Gently put the tip of the tuning wrench into the slot in the tuning slug. Be careful not to push hard on the slug so as not to damage the threads in the coil, and do not screw it down more than 3 turns into the coil.

Step 8: Turn the tuning slug in a counter-clockwise direction about two turns. Then, slowly turn the tuning slug in the clockwise direction until the signal is heard. There may be two signal points heard. The one which is received first is a false response. Be sure to continue tuning slightly further to the correct point, which will be much louder. Tune back and forth to find the center of the point of best response to the program being heard.

Step 9: Mark down the date, and if a new frequency has been chosen, mark it down inside the receiver case for future reference.

In Case of Difficulty:

If your TOUR GUIDE System is not working, check the following:

(1)Make sure the batteries are fresh or completely charged and installed with the correct polarity.

(2)Make sure the microphone is plugged into the Transmitter and the headphone is plugged into the Receiver. They will not work if they are reversed.

(3)Move the Transmitter and Receiver closer together. You may be out of range. When using the system indoors, it is normal for the signal to momentarily disappear in certain locations. This is called a "drop-out". Moving a few feet will restore the signal.

(4)Make sure that the Transmitter and Receivers are tuned to the same channel. The units have stickers inside the back cover identifying the channel.

(5)Do not try to use more than one Transmitter on the same channel in close proximity to each other. MORE THAN ONE TRANSMITTER ON THE SAME CHANNEL WILL RESULT IN INTER- FERENCE IF THEY ARE CLOSE TOGETHER. Keep the systems 50 - 100 feet apart or use sep- arate channels for each system used.

(6)If the rechargeable batteries will only work for a short period of time (less than 1 hour) even after it is fully charged, it must be regenerated. Leave it in the unit, with the unit turned on, for 5 - 6 hours Then turn the unit off and charge for 14 - 16 hours. This should restore normal battery life. The rechargeable battery will gradually lose its capacity over time and should be replaced every year.

(7)If you are still hearing interference on the Receivers, turn the Transmitter off and listen with a receiver. If you hear the interference with the Transmitter off, you need to change to a clear channel. See the re-tuning instructions.

Page 12

TGS SYS A specifications

The Williams Sound TGS SYS A is a cutting-edge assistive listening system designed to enhance the audio experience for individuals with hearing impairments. This system is particularly beneficial in environments such as theaters, conference rooms, and places of worship, where clear sound is crucial for participation and understanding.

One of the standout features of the TGS SYS A is its versatility. The system is equipped with easy-to-use transmitters and receivers, allowing users to enjoy high-quality audio without the need for complex setup. It utilizes a radio frequency (RF) transmission technology, which ensures reliable sound delivery even in larger venues. This eliminates many of the common challenges associated with assistive listening devices, such as interference and limited range.

The TGS SYS A includes a variety of components tailored to different listening needs. The system typically features a transmitter that can interface with a microphone or audio source, allowing for seamless connection to various sound systems. Coupled with lightweight, ergonomically designed receivers, users can experience enhanced clarity and volume, making it easier for them to engage with the audio content being presented.

Another significant characteristic of the Williams Sound TGS SYS A is its commitment to user comfort and convenience. The receivers are often equipped with adjustable volume controls and can accommodate users wearing hearing aids, thanks to the built-in telecoil capability. This means that individuals can maximize their existing technology while benefiting from the additional amplification provided by the system.

Durability and build quality are also points of excellence for the TGS SYS A. The components are constructed to withstand the rigors of daily use, making them ideal for both temporary setups and permanent installations. Furthermore, they are designed for easy maintenance, ensuring that venues can provide reliable assistive listening services without frequent disruptions.

The TGS SYS A is also adaptable to various settings, catering to a diverse array of individuals and groups. Its straightforward operation ensures that both users and facilitators can engage with the system comfortably, fostering a more inclusive environment.

In conclusion, the Williams Sound TGS SYS A stands out as a robust solution for assistive listening needs. With its user-friendly design, exceptional audio performance, and adaptability to numerous environments, it represents a significant advancement in making sound more accessible to everyone.