![](/images/new-backgrounds/1104938/104938265x1.webp)
Installing a new ADF
If your HP LaserJet 3300 came without an ADF, you can upgrade it by adding one. The ADF replaces your current lid, includes a
1 |
2 |
To install a new or replacement ADF
1Remove the flatbed scanner lid by opening it and gently lifting straight up.
Note
If you are replacing an existing ADF, you must first pull up both hinge tabs before lifting the ADF up out of the product.
2On the new ADF, unfold the hinges and pull up the tab on each hinge.
3Install the new ADF by inserting the hinges straight down into the product.
4Push down both tabs until they click.
3
4
EN | Installing a new ADF 131 |