Changing the number of copies
You can choose to have the default number of copies be any value from 1 to 99.
To change the number of copies for the current job
1From the product’s control panel, press # of copies and use the < and > buttons to inicrement or decrement the quantity that appears in the control panel display;
OR
Use the numeric keypad to enter the number of copies (between 1 and 99) that you want to make for your current job.
2Press start/copy to begin copying your job.
To change the default number of copies
1From the control panel, press menu/enter.
2Use the < and > buttons to select Copy Setup and press menu/enter.
3Use the < and > buttons to select Def. # of Copies and press menu/enter.
4Use the numeric keypad to enter the number of copies (between 1 and 99) that you want as the default.
5Press menu/enter to save your selection.
Note | The default set at the factory for number of copies is 1. |
Using HP LaserJet Copier software
You can use HP LaserJet Copier to perform any of the following tasks when you copy your original:
●Print up to 99 copies of the same document
●Enable or disable collation
●Reduce or enlarge the image
●Adjust the contrast
●Specify the copy quality
●Make color copies by sending to a color printer using HP LaserJet Copy Plus
Note | This functionality is not available in Windows 95. |
To access HP LaserJet Copier (Windows or Macintosh)
To access HP LaserJet Copier, use one of the following methods:
●From HP LaserJet Director, click Copy or Copy Plus.
●From the Windows task bar, click Start, Programs, HP LaserJet 3300, and HP LaserJet Copier.
●From HP LaserJet Document Manager (Windows), click the Copier icon.
OR
From HP Workplace (Macintosh), click the Copy or Copy Plus icon.
60 5 Copying | EN |
