![](/images/new-backgrounds/1104938/104938421x1.webp)
Error Code and Message | Description |
|
|
23 | A failure was detected when the print server tried to attach to one of the |
UNABLE TO ATTACH TO | queues assigned to the print server object. This may be because no |
QUEUE | servers are allowed to attach to this queue. There may also be a networking |
| or security problem. Use PCONSOLE to make sure that servers are |
| allowed to attach to the queue, to delete the print server object from the list |
| of queue servers if you want the print server to service other queues, or to |
| delete the queue and create a new one (the print server object must be |
| added to the list of queue servers). |
| Note: When the print server is configured for multiple file servers, the error |
| is only displayed on the configuration page if none of the file servers was |
| successfully connected. |
|
|
24 | The NetWare print server requested a termination of the connection with |
PSERVER CLOSED | the print server. No error exists or is indicated. Make sure the NetWare print |
CONNECTION | server is running, and restart it if necessary. |
|
|
25 | The SPX connection to the print server was lost after the connection had |
DISCONNECTING - SPX | been made. This indicates a possible network problem, or a problem with |
TIMEOUT | the print server. Make sure all cables and routers are functioning correctly. |
| Try restarting the print server. |
|
|
26 | The print server encountered an unexpected fatal error after it had |
UNKNOWN NCP RETURN | successfully connected to the file server. A wide variety of failures could |
CODE | produce this error message, including a downed file server or a network |
| router failure. |
|
|
27 | The print server sent some data when the print server had not given its |
UNEXPECTED PSERVER | permission to do so. This indicates a possible print server problem, possibly |
DATA RCVD | a software problem. |
|
|
28 | The print server was unable to allocate a buffer from its internal memory. |
OUT OF BUFFERS | This indicates all buffers are busy due possibly to heavy broadcast traffic or |
| large amounts of network traffic directed to the print server. |
|
|
29 | The print server has been trying for more than three minutes to determine |
UNABLE TO SENSE NET | the NetWare protocol used on the network. Make sure that any file servers |
NUMBER | and routers are operating correctly. Make sure that the settings for NetWare |
| frame type and source routing are correct. |
|
|
2A | More queues were assigned than the print server can handle. Remove one |
NDS ERR: EXCEEDS MAX | or more print queues from the list to be serviced by Queue Server Mode. |
SERVERS |
|
|
|
2B | Unable to log onto the NetWare directory tree. Make sure that the print |
NDS ERR: UNABLE TO | server object is defined in the directory at the correct context. Clear the |
LOGIN | print server password using NWADMIN or similar NetWare tool. |
|
|
2C | Unable to log onto the NetWare directory tree. Make sure that the print |
AUTHENTICATION ERROR | server object is defined in the directory at the correct context. |
EN | Interpreting the configuration page 209 |