AppleTalk protocol information | Hitachi 3300MFP specification

AppleTalk protocol information

Provides the current status and parameter values for the AppleTalk network protocol.

Message	Description

Status	Indicates the current AppleTalk configuration status.
	●	Ready the print server is awaiting data.
	●	Disabled AppleTalk was manually disabled.
	●	Initializing the print server is registering the node address or
		name. An additional status message may also be displayed.
	An error code and message are displayed if the print server is not ready.

Name	The name of the printer on the AppleTalk network. A number after the name
	indicates that there are multiple devices with this name, and this is the Nth
	instance of the name.

Zone	The name of the AppleTalk network zone on which the printer is located.

Type	The type of the printer being advertised on the network. Two types can be
	displayed.

Network Number	The AppleTalk Network Number on which the print server is currently
	operating.

Node Number	The AppleTalk Node Number that the print server chose for itself as part of
	its initialization sequence.

Note: The AppleTalk phase 2 (P2) parameter is preconfigured on the print server.

DLC/LLC protocol information

Provides the current status and parameter values for the DLC/LLC network protocol.

Message	Description

Status	Indicates the current DLC/LLC configuration status.
	●	Ready the print server is awaiting data.
	●	Disabled DLC/LLC was manually disabled.
	●	Initializing the print server is registering the node address or
		name. An additional status message may also be displayed.

An error code and message are displayed if the print server is not ready.

EN	Interpreting the configuration page 205

Image 207

Hitachi 3300MFP manual AppleTalk protocol information, DLC/LLC protocol information

Contents

Use Page User guide Copyright Information Contents Printing Scanning Page Networking Cleaning and maintenance Troubleshooting printing problems Troubleshooting scanning problems Troubleshooting network problems Appendix B Warranties and licensing Getting to know your product HP LaserJet 3300mfp Identifying your product HP LaserJet 3300se mfp HP LaserJet 3310mfp HP LaserJet 3320mfp HP LaserJet 3320n mfp HP LaserJet 3330mfp HP LaserJet 3300 series hardware components Identifying your product’s hardware components Fax controls Identifying your product’s control panel components Alphanumeric buttons Menu and cancel controls Copy, scan, and start controls Identifying HP Jetdirect 310x print server components Identifying your product’s software components Getting started Finding a location for your product Connecting a printer cable to your product Sealing tape at the end of the cartridge Installing a print cartridge Installing and loading the media input trays Connecting the power cord Installing the ADF input tray To load originals onto the flatbed scanner Loading originals to copy or scan To load originals into the ADF input tray To self-test the copier using the ADF input tray Verifying your workTo self-test the printer To print a control panel menu map To self-test the copier using the flatbed scanner Changing your product’s general default settings Printing a control panel menu map HP LaserJet 3300 series product settingsPrinting a configuration Restoring the factory default settings Changing the default paper size Using the product’s volume controlsChanging the display panel language To change the control panel key press volume Changing settings from your computerTo change the volume for the fax product To change the ring volume of the fax product To change default settings across all applications Macintosh To change default settings across all applications Windows 40 3 Changing your product’s general default settings Printing Printing with manual feed Stopping or canceling a print jobUnderstanding print quality settings To print using manual feed Choose Device Configuration To temporarily change print quality settingsTo change print quality settings for all future jobs To enable EconoMode save toner Optimizing print quality for media types To access the optimizing feature To print one envelope Printing envelopes To print multiple envelopes To print transparencies or labels Printing transparencies and labels To print letterhead or preprinted forms Printing letterhead or preprinted forms Printing custom-sized media or card stock Printing on both sides of the media manual duplexingTo print custom-sized media or card stock To duplex manually on lightweight media Page Printing multiple pages on a single sheet of media To print multiple pages on a single sheet WindowsTo print multiple pages on a single sheet Macintosh To print booklets Printing booklets Printing watermarks To access the watermark feature Copying Starting a copy job Canceling a copy jobAdjusting copy quality for the current job To adjust the copy quality for the current job To adjust the lighter/darker setting for the current job Adjusting the default copy qualityAdjusting the default lighter/darker contrast setting To adjust the copy quality Original 100% Legal to Letter 78% Legal to A4 83% Adjusting the default copy sizeReducing or enlarging copies for the current job To reduce or enlarge copies for the current job To change the default copy collation setting Changing the copy collation settingTo change the default copy size To change the copy collation setting for the current job Changing the number of copies Using HP LaserJet Copier softwareTo change the default number of copies To access HP LaserJet Copier Windows or Macintosh Click Copy and select, I want to copy to another printer Using HP LaserJet Copy Plus softwareTo access HP LaserJet Copy Plus Windows To access HP LaserJet Copy Plus Macintosh Copying photos, two-sided originals, or books To copy or scan a photoTo copy a multiple page stack of 2-sided originals To copy a book 64 5 Copying Scanning Scanning from the product’s control panel Understanding scanning methods Press start scan or menu/enter To use the scan to button via USB or parallel connectionTo use the scan to button via network connection To reprogram the scan to button destinations To reprogram the start scan button Canceling a scan jobTo scan using HP LaserJet Director Windows Scanning with the product software To use page-by-page scanning Windows To scan using HP LaserJet Director Macintosh Scanning with TWAIN-compliant software To use page-by-page scanning MacintoshTo use flatbed scanner preview scan To use the archive feature Macintosh Archiving scanned text or imagesTo archive a scanned image To change the OCR word processing application To use HP LaserJet Director’s OCR featureScanning with OCR To edit scanned text Windows and MacintoshPage Adding annotations to HP documents To access image enhancement features Windows To scan to e-mail Windows To change the annotation settingsAdding annotations to scanned image files Sending scanned items as e-mail attachments Scanner resolution and color To e-mail scanned files in an alternative modeTo scan to e-mail Macintosh Resolution and color guidelines Color Setting Recommended use Where to set the color value Faxing To set the fax header Setting the information in the fax headerSetting the answer mode To set the answer mode To send a fax to one recipient Loading originals to faxSending faxes To load fax documents into the ADF input tray To send a fax using a group-dial code To send a fax to multiple recipientsTo send a fax to an ad hoc group To cancel a fax job using fax job status Canceling a fax jobUsing manual dial To cancel the current fax job To delete faxes from memory Deleting faxes from memoryRedialing manually Sending a fax at a future time To reprint a fax To receive faxes when you hear fax tonesReceiving faxes To send a fax at a future time To block or unblock fax numbers Receiving faxes to your computer To program speed-dial codes and one-touch keys To turn the receive to PC setting off from the control panel To quickly program speed-dial codes or one-touch keys To delete speed-dial codes and one-touch keys Managing group-dial codes To program a one-touch key for alternate long distanceTo program group-dial codes To delete an individual from a group-dial code To delete group-dial codes Dialing character table Using dialing charactersDeleting all phone book entries To delete all phone book entries Inserting a dial prefix To insert a pause or waitTo set the dial prefix Using fax forwarding Using fax pollingEnabling an extension phone Sending a fax by dialing from a telephone Changing the HP LaserJet 3330 product’s volume settingsTo change the fax sounds line monitor volume To change the ring volume Changing the default resolution Changing the default contrastChanging the detect dial tone setting To set the answer mode to automatic or manual Changing how the product answers incoming faxesChanging rings-to-answer Changing answer ring patterns Changing the silence-detect mode Enabling stamp received faxes Changing autoreduction settings for incoming faxesTo change the silence detect mode To enable stamp received faxes To change the error correction setting Setting the fax error correctionSelecting tone- or pulse-dialing mode Changing redial settings Changing the V.34 setting Using billing codes Managing fax logs and reports Printing the fax activity logTo print the fax activity log To set the fax activity log to print automatically Setting the fax activity log to print automaticallySetting fax call report print times Printing a fax call report To set fax call report print times Including the first page of each fax on the fax call reportPrinting a phone book report Printing the billing codes report Printing the block fax list Printing a T.30 protocol trace report To print all fax reports Printing all fax reports 106 7 Faxing Networking Printing protocols Understanding the print server’s features and benefitsUsing network protocols Software installation Network connection requirements Model Product Connectors Firmware Supported protocol Version 110 8 Networking To connect the product to a network Installing the 310x print serverPage Compatible web browsers Installing the network softwareUsing the embedded web server Prerequisites Using HP Web JetAdmin Using BootpTo start the embedded web server Windows 2000 or NT servers Setting up the Bootp serverBootptab file entries NetWare Bootp servers Tag RFC Description Option Server sends syslog messages Windows NT 4.0 servers Using DhcpWindows NT Procedure Unix servers Windows 2000 servers Windows 2000 Procedure Configuring the print server for Dhcp configuration Changing the BOOTP/DHCP configuration methodReturning to factory defaults For more information Printing a print server configurationTo print a Jetdirect configuration Moving to another network Cleaning and maintenance To clean the lid backing Cleaning the outside of the productTo clean the exterior To clean the glass To clean the print cartridge area Cleaning the print cartridge area To clean the pickup roller Cleaning the printer media pathCleaning the pickup roller To clean the printer media path To change the pickup roller Changing the pickup rollerPage To change the printer separation pad Changing the printer separation padPage To install a new or replacement ADF Installing a new ADFPage Changing an ADF pickup roller assembly Page Removing and replacing the control panel bezel 136 9 Cleaning and maintenance Media Paper Product media specificationsGuidelines for using media Supported media sizes printer Transparencies Common media problems tableSymptom Problem with paper Solution Labels Card stock and heavy media Envelopes Card stock guidelines ADF specificationsSelecting media for the ADF Card stock construction 142 10 Media HP parts and accessories Ordering HP parts and accessories HP parts and accessories chartDescription or use Power modules network model only Description or use Part numberCountries/Regions Part number Input rating Output rating HP LaserJet print cartridges HP policy on non-HP print cartridgesCountry/Regions Part number Input rating Output rating Storing print cartridges To install a print cartridge Recycling print cartridges To test a Dimm installation or removalDIMMs memory or font Print cartridge life expectancy To install a Dimm Page To remove a Dimm 152 11 HP parts and accessories Troubleshooting printing problems Pages print but are totally blank Product will not turn on or print Pages printed, but there was a problem Onscreen error messagesPages did not print Printed page is different from what appeared onscreen Paper handling problems Are graphics or text missing? Are there blank pages? Is the page format different than on another printer?Is graphics quality poor? To clear a media jam Clearing media jams Tips to avoid media jams To clear other media jams Improving print quality Light print or fadeToner specks Gray background Vertical lines Toner smear Loose tonerVertical repetitive defects Skew Misformed characters Wrinkles or creases Curl or wave Door Open or No Print Cartridge Control panel error messagesCritical error messages Toner scatter outline Alert messages Troubleshooting copy problems Improving copy quality Preventing problemsNo copy came out Copies are blank, or images are missing or faded Clearing ADF media jams To clear a media jam from the ADFTypical ADF jam locations Removing a jammed ADF Vertical white or faded stripes Identifying and correcting copy defects Black dots or streaks Blank pagesToo light or dark Unwanted lines Reduced size 174 13 Troubleshooting copy problems Troubleshooting scanning problems Part of the image did not scan or text is missing Scanned image is of poor quality Text cannot be edited Scan takes too long Error messages appear on the screen Improving scan quality Scanner did nothing Identifying and correcting scan defects Troubleshooting faxing problems Is the phone wall jack working properly? Fax phone problemsAre you using the phone cord supplied with the product? What type of phone line are you using? Is the document too large or too small for the ADF? Document stops feeding during faxing Product is receiving faxes but not sending them Outgoing fax calls keep dialingFaxes you send are not arriving All of the numbers in a long fax number cannot be dialed Unable to start receiving faxes from an extension phoneIncoming fax calls are not being answered Is the product out of paper? Is the answer ring pattern feature turned on?Are there too many devices connected to the phone line? Is the phone line working? Received faxes are too light or are printing only on half Faxes are transmitting or being received very slowlyFaxes are not printing or are printing incorrectly Faxes are printing on two pages instead of one Volume is too high or low Are the activity log and call report settings correct?Do the volume settings need to be adjusted? Troubleshooting network problems USB OK? USB light on solid green? Troubleshooting overviewOn and Ready Is your printer on and READY? Is the USB light now on solid green? What is the state of the USB light?Is the USB light on solid green? USB light OFF Power/Status OK? Power/Status light on solid green? Is the Power/Status light on solid green?USB light blinking amber 10/100 link OK? 10 light or 100 light on solid green? Check the print server’s I/O status Error messages Configuration page does not print LAN Error no Linkbeat LAN Error External LoopbackLAN Error Infinite Deferral LAN Error Retry Faults Interpreting the configuration Message Description General information USB port information Network statisticsMessageDescription TCP/IP protocol information Total number of frames packets transmitted without error Value 202 16 Troubleshooting network problems Associated with each network number IPX/SPX protocol information Novell/NetWare protocol information DLC/LLC protocol information AppleTalk protocol information Error Code and Message Description Error messages Beat 208 16 Troubleshooting network problems Added to the list of queue servers 210 16 Troubleshooting network problems On the spooling server 212 16 Troubleshooting network problems Was not the BOOTP/DHCP server port 67/udp Browse hp.com Term Definition Glossary Glossary 217 File format 219 PPD 221 Glossary Appendix a Specifications and regulatory information HP LaserJet 3300 series product HP LaserJet 3300 series product specificationsEnvironmental specifications Electrical specifications Physical specifications Printer capacities and ratingsCopier capacities and ratings Scanner capacities and ratings Laser safety statementADF specifications Memory specifications FCC regulations According to ISO/IEC Guide 22 and EN Declaration of Conformity Laser statement for Finland Canada DOC regulations HP LaserJet 3330 product fax specifications HP LaserJet 3330 faxKorean EMI statement Japan Vcci Class B regulations Telephone consumer protection act US FCC Part 68 Requirements US HP Jetdirect 310x print server Supported networks HP Jetdirect 310x print server specifications Safety Electromagnetic immunityElectromagnetic emissions FCC compliance According to ISO/IEC Guide 22 and EN45014 Australia CanadaJapan Vcci Class 1 regulations Korean EMI statement Chinese safety statement Environmental product stewardship program Material safety data sheets US returns Non-US returns PaperMaterial restrictions For more information HP LaserJet 3300 series product batteryExtended warranty Spare parts and consumables availability Appendix a Specifications and regulatory information HP software license agreement Appendix B Warranties and licensing HP limited warranty statement HP limited warranty statement Appendix B Warranties and licensing Returning the unit Appendix C Service and supportObtaining hardware service To obtain hardware service Extended warranty Service information formService information form Service information form Appendix C Service and support ADF Index Index See also media Index Loose 162 smear 162 specks 160 transparencies printing Page Copyright Hewlett-Packard Company