To self-test the copier using the flatbed scanner | Hitachi 3300MFP

To self-test the copier using the flatbed scanner

If your product does not have an ADF input tray, you can still test the copier by placing the configuration page on the flatbed scanner.

1Place the configuration page face down on the flatbed scanner with the top left corner of the document located in the lower right corner of the glass.

2Gently close the lid.

3On the product’s control panel, press start/copy.

The product makes a copy of the configuration page and the control panel display returns to Ready. If the page does not copy successfully, see Troubleshooting copy problems.

CAUTION	To prevent damaging the product, do not allow the scanner lid to fall onto the flatbed scanner surface.
	Always close the scanner lid when the product is not in use.

To print a control panel menu map

In addition to printing a configuration page, you can also test your product by printing a menu map that shows all of the control panel menu options.

To print a control panel menu map, use the following steps:

1On the product’s control panel, press menu/enter.

2Use the < and > buttons to select Reports and press menu/enter.

3Use the < and > buttons to select Menu Structure and press menu/enter.

A menu map prints, showing all of the product’s control panel menu options. If the menu map does not print successfully, see Troubleshooting printing problems.

34 2 Getting started

EN

Image 36

Hitachi 3300MFP manual To self-test the copier using the flatbed scanner, To print a control panel menu map

Contents

Use Page User guide Copyright Information Contents Printing Scanning Page Networking Cleaning and maintenance Troubleshooting printing problems Troubleshooting scanning problems Troubleshooting network problems Appendix B Warranties and licensing Getting to know your product Identifying your product HP LaserJet 3300mfp HP LaserJet 3300se mfp HP LaserJet 3310mfp HP LaserJet 3320mfp HP LaserJet 3320n mfp HP LaserJet 3330mfp Identifying your product’s hardware components HP LaserJet 3300 series hardware components Identifying your product’s control panel components Fax controls Menu and cancel controls Alphanumeric buttons Identifying HP Jetdirect 310x print server components Copy, scan, and start controls Identifying your product’s software components Getting started Finding a location for your product Connecting a printer cable to your product Installing a print cartridge Sealing tape at the end of the cartridge Installing and loading the media input trays Installing the ADF input tray Connecting the power cord Loading originals to copy or scan To load originals onto the flatbed scanner To load originals into the ADF input tray To self-test the copier using the ADF input tray Verifying your workTo self-test the printer To self-test the copier using the flatbed scanner To print a control panel menu map Changing your product’s general default settings HP LaserJet 3300 series product settings Printing a configurationRestoring the factory default settings Printing a control panel menu map Changing the default paper size Using the product’s volume controlsChanging the display panel language Changing settings from your computer To change the volume for the fax productTo change the ring volume of the fax product To change the control panel key press volume To change default settings across all applications Windows To change default settings across all applications Macintosh 40 3 Changing your product’s general default settings Printing Stopping or canceling a print job Understanding print quality settingsTo print using manual feed Printing with manual feed To temporarily change print quality settings To change print quality settings for all future jobsTo enable EconoMode save toner Choose Device Configuration To access the optimizing feature Optimizing print quality for media types Printing envelopes To print one envelope To print multiple envelopes Printing transparencies and labels To print transparencies or labels Printing letterhead or preprinted forms To print letterhead or preprinted forms Printing custom-sized media or card stock Printing on both sides of the media manual duplexingTo print custom-sized media or card stock To duplex manually on lightweight media Page Printing multiple pages on a single sheet of media To print multiple pages on a single sheet WindowsTo print multiple pages on a single sheet Macintosh Printing booklets To print booklets To access the watermark feature Printing watermarks Copying Canceling a copy job Adjusting copy quality for the current jobTo adjust the copy quality for the current job Starting a copy job Adjusting the default copy quality Adjusting the default lighter/darker contrast settingTo adjust the copy quality To adjust the lighter/darker setting for the current job Adjusting the default copy size Reducing or enlarging copies for the current jobTo reduce or enlarge copies for the current job Original 100% Legal to Letter 78% Legal to A4 83% Changing the copy collation setting To change the default copy sizeTo change the copy collation setting for the current job To change the default copy collation setting Using HP LaserJet Copier software To change the default number of copiesTo access HP LaserJet Copier Windows or Macintosh Changing the number of copies Using HP LaserJet Copy Plus software To access HP LaserJet Copy Plus WindowsTo access HP LaserJet Copy Plus Macintosh Click Copy and select, I want to copy to another printer Copying photos, two-sided originals, or books To copy or scan a photoTo copy a multiple page stack of 2-sided originals To copy a book 64 5 Copying Scanning Understanding scanning methods Scanning from the product’s control panel To use the scan to button via USB or parallel connection To use the scan to button via network connectionTo reprogram the scan to button destinations Press start scan or menu/enter Canceling a scan job To scan using HP LaserJet Director WindowsScanning with the product software To reprogram the start scan button To scan using HP LaserJet Director Macintosh To use page-by-page scanning Windows Scanning with TWAIN-compliant software To use page-by-page scanning MacintoshTo use flatbed scanner preview scan To use the archive feature Macintosh Archiving scanned text or imagesTo archive a scanned image To use HP LaserJet Director’s OCR feature Scanning with OCRTo edit scanned text Windows and Macintosh To change the OCR word processing applicationPage To access image enhancement features Windows Adding annotations to HP documents To change the annotation settings Adding annotations to scanned image filesSending scanned items as e-mail attachments To scan to e-mail Windows Scanner resolution and color To e-mail scanned files in an alternative modeTo scan to e-mail Macintosh Resolution and color guidelines Setting Recommended use Where to set the color value Color Faxing Setting the information in the fax header Setting the answer modeTo set the answer mode To set the fax header Loading originals to fax Sending faxesTo load fax documents into the ADF input tray To send a fax to one recipient To send a fax using a group-dial code To send a fax to multiple recipientsTo send a fax to an ad hoc group Canceling a fax job Using manual dialTo cancel the current fax job To cancel a fax job using fax job status Deleting faxes from memory Redialing manuallySending a fax at a future time To delete faxes from memory To receive faxes when you hear fax tones Receiving faxesTo send a fax at a future time To reprint a fax Receiving faxes to your computer To block or unblock fax numbers To turn the receive to PC setting off from the control panel To program speed-dial codes and one-touch keys To delete speed-dial codes and one-touch keys To quickly program speed-dial codes or one-touch keys Managing group-dial codes To program a one-touch key for alternate long distanceTo program group-dial codes To delete group-dial codes To delete an individual from a group-dial code Using dialing characters Deleting all phone book entriesTo delete all phone book entries Dialing character table Inserting a dial prefix To insert a pause or waitTo set the dial prefix Using fax forwarding Using fax pollingEnabling an extension phone Changing the HP LaserJet 3330 product’s volume settings To change the fax sounds line monitor volumeTo change the ring volume Sending a fax by dialing from a telephone Changing the default resolution Changing the default contrastChanging the detect dial tone setting To set the answer mode to automatic or manual Changing how the product answers incoming faxesChanging rings-to-answer Changing the silence-detect mode Changing answer ring patterns Changing autoreduction settings for incoming faxes To change the silence detect modeTo enable stamp received faxes Enabling stamp received faxes Setting the fax error correction Selecting tone- or pulse-dialing modeChanging redial settings To change the error correction setting Using billing codes Changing the V.34 setting Managing fax logs and reports Printing the fax activity logTo print the fax activity log Setting the fax activity log to print automatically Setting fax call report print timesPrinting a fax call report To set the fax activity log to print automatically Including the first page of each fax on the fax call report Printing a phone book reportPrinting the billing codes report To set fax call report print times Printing a T.30 protocol trace report Printing the block fax list Printing all fax reports To print all fax reports 106 7 Faxing Networking Understanding the print server’s features and benefits Using network protocolsSoftware installation Printing protocols Model Product Connectors Firmware Supported protocol Version Network connection requirements 110 8 Networking Installing the 310x print server To connect the product to a networkPage Installing the network software Using the embedded web serverPrerequisites Compatible web browsers Using HP Web JetAdmin Using BootpTo start the embedded web server Setting up the Bootp server Bootptab file entriesNetWare Bootp servers Windows 2000 or NT servers Tag RFC Description Option Server sends syslog messages Using Dhcp Windows NT ProcedureUnix servers Windows NT 4.0 servers Windows 2000 servers Windows 2000 Procedure Configuring the print server for Dhcp configuration Changing the BOOTP/DHCP configuration methodReturning to factory defaults Printing a print server configuration To print a Jetdirect configurationMoving to another network For more information Cleaning and maintenance Cleaning the outside of the product To clean the exteriorTo clean the glass To clean the lid backing Cleaning the print cartridge area To clean the print cartridge area Cleaning the printer media path Cleaning the pickup rollerTo clean the printer media path To clean the pickup roller Changing the pickup roller To change the pickup rollerPage Changing the printer separation pad To change the printer separation padPage Installing a new ADF To install a new or replacement ADFPage Changing an ADF pickup roller assembly Page Removing and replacing the control panel bezel 136 9 Cleaning and maintenance Media Product media specifications Guidelines for using mediaSupported media sizes printer Paper Common media problems table Symptom Problem with paper SolutionLabels Transparencies Envelopes Card stock and heavy media ADF specifications Selecting media for the ADFCard stock construction Card stock guidelines 142 10 Media HP parts and accessories Ordering HP parts and accessories HP parts and accessories chartDescription or use Power modules network model only Description or use Part numberCountries/Regions Part number Input rating Output rating HP LaserJet print cartridges HP policy on non-HP print cartridgesCountry/Regions Part number Input rating Output rating To install a print cartridge Storing print cartridges To test a Dimm installation or removal DIMMs memory or fontPrint cartridge life expectancy Recycling print cartridges To install a Dimm Page To remove a Dimm 152 11 HP parts and accessories Troubleshooting printing problems Product will not turn on or print Pages print but are totally blank Pages printed, but there was a problem Onscreen error messagesPages did not print Paper handling problems Printed page is different from what appeared onscreen Are graphics or text missing? Are there blank pages? Is the page format different than on another printer?Is graphics quality poor? Clearing media jams To clear a media jam To clear other media jams Tips to avoid media jams Improving print quality Light print or fadeToner specks Vertical lines Gray background Toner smear Loose tonerVertical repetitive defects Misformed characters Skew Curl or wave Wrinkles or creases Control panel error messages Critical error messagesToner scatter outline Door Open or No Print Cartridge Alert messages Troubleshooting copy problems Preventing problems No copy came outCopies are blank, or images are missing or faded Improving copy quality Clearing ADF media jams To clear a media jam from the ADFTypical ADF jam locations Removing a jammed ADF Identifying and correcting copy defects Vertical white or faded stripes Blank pages Too light or darkUnwanted lines Black dots or streaks Reduced size 174 13 Troubleshooting copy problems Troubleshooting scanning problems Scanned image is of poor quality Part of the image did not scan or text is missing Text cannot be edited Error messages appear on the screen Scan takes too long Scanner did nothing Improving scan quality Identifying and correcting scan defects Troubleshooting faxing problems Fax phone problems Are you using the phone cord supplied with the product?What type of phone line are you using? Is the phone wall jack working properly? Document stops feeding during faxing Is the document too large or too small for the ADF? Product is receiving faxes but not sending them Outgoing fax calls keep dialingFaxes you send are not arriving All of the numbers in a long fax number cannot be dialed Unable to start receiving faxes from an extension phoneIncoming fax calls are not being answered Is the answer ring pattern feature turned on? Are there too many devices connected to the phone line?Is the phone line working? Is the product out of paper? Faxes are transmitting or being received very slowly Faxes are not printing or are printing incorrectlyFaxes are printing on two pages instead of one Received faxes are too light or are printing only on half Volume is too high or low Are the activity log and call report settings correct?Do the volume settings need to be adjusted? Troubleshooting network problems Troubleshooting overview On and ReadyIs your printer on and READY? USB OK? USB light on solid green? What is the state of the USB light? Is the USB light on solid green?USB light OFF Is the USB light now on solid green? Power/Status OK? Power/Status light on solid green? Is the Power/Status light on solid green?USB light blinking amber 10/100 link OK? 10 light or 100 light on solid green? Check the print server’s I/O status Configuration page does not print Error messages LAN Error External Loopback LAN Error Infinite DeferralLAN Error Retry Faults LAN Error no Linkbeat Interpreting the configuration General information Message Description USB port information Network statisticsMessageDescription Total number of frames packets transmitted without error TCP/IP protocol information Value 202 16 Troubleshooting network problems IPX/SPX protocol information Associated with each network number Novell/NetWare protocol information AppleTalk protocol information DLC/LLC protocol information Error messages Error Code and Message Description Beat 208 16 Troubleshooting network problems Added to the list of queue servers 210 16 Troubleshooting network problems On the spooling server 212 16 Troubleshooting network problems Was not the BOOTP/DHCP server port 67/udp Browse hp.com Glossary Term Definition Glossary 217 File format 219 PPD 221 Glossary Appendix a Specifications and regulatory information HP LaserJet 3300 series product specifications Environmental specificationsElectrical specifications HP LaserJet 3300 series product Physical specifications Printer capacities and ratingsCopier capacities and ratings Laser safety statement ADF specificationsMemory specifications Scanner capacities and ratings FCC regulations Declaration of Conformity According to ISO/IEC Guide 22 and EN Canada DOC regulations Laser statement for Finland HP LaserJet 3330 product fax specifications HP LaserJet 3330 faxKorean EMI statement Japan Vcci Class B regulations FCC Part 68 Requirements US Telephone consumer protection act US HP Jetdirect 310x print server HP Jetdirect 310x print server specifications Supported networks Safety Electromagnetic immunityElectromagnetic emissions FCC compliance According to ISO/IEC Guide 22 and EN45014 Australia CanadaJapan Vcci Class 1 regulations Korean EMI statement Chinese safety statement Environmental product stewardship program Material safety data sheets US returns Non-US returns PaperMaterial restrictions HP LaserJet 3300 series product battery Extended warrantySpare parts and consumables availability For more information Appendix a Specifications and regulatory information Appendix B Warranties and licensing HP software license agreement HP limited warranty statement HP limited warranty statement Appendix B Warranties and licensing Appendix C Service and support Obtaining hardware serviceTo obtain hardware service Returning the unit Extended warranty Service information formService information form Service information form Appendix C Service and support Index ADF Index See also media Index Loose 162 smear 162 specks 160 transparencies printing Page Copyright Hewlett-Packard Company