IPX/SPX protocol information | Hitachi 3300MFP manual

IPX/SPX protocol information

Provides the current status and parameter values for the IPX/SPX network protocols.

Message	Description

Status	Indicates the current IPX/SPX protocol status.
	●	Ready the print server is awaiting data over IPX/SPX.
	●	Disabled IPX/SPX was manually disabled.
	●	Initializing the print server is registering the node address or
		name. An additional status message may also be displayed.
	An error code and message are displayed if the print server is not ready.

Primary Frame Type	Specifies the frame type selection on the print server.
	●	Auto Select the print server automatically senses and limits the
		frame type to the first one detected.
	●	EN_II limits the frame type to IPX over Ethernet frames. All others will
		be counted and discarded.
	●	EN_802.2 limits the frame type to IPX over IEEE 802.2 with IEEE
		802.3 frames. All others will be counted and discarded.
	●	EN_SNAP limits the frame type to IPX over SNAP with IEEE 802.3
		frames. All others will be counted and discarded.
	●	EN_802.3 limits the frame type to IPX over IEEE 802.3 frames. All
		others will be counted and discarded.

Network	The first column headed Network indicates the network number associated
	with each protocol frame type used for communication between a server
	and the print server.
	●	Unknown the print server is still trying to determine which network
		number to use.

Frame Type	The second column headed Frame Type identifies the frame type
EN_II	associated with each network number.
EN_802.2
EN_SNAP	Unless a specific frame type has been manually configured, the print server
EN_802.3	automatically determines the protocol frame type by listening to the network
	data being transferred over the network.
	●	Disabled a specific frame type for that network has been manually
		configured.

Rcvd	The third column headed Rcvd indicates how many packets have been
	received for each frame type.

EN	Interpreting the configuration page 203

Image 205

Hitachi 3300MFP manual IPX/SPX protocol information, Associated with each network number

Contents

Use Page User guide Copyright Information Contents Printing Scanning Page Networking Cleaning and maintenance Troubleshooting printing problems Troubleshooting scanning problems Troubleshooting network problems Appendix B Warranties and licensing Getting to know your product HP LaserJet 3300mfp Identifying your product HP LaserJet 3300se mfp HP LaserJet 3310mfp HP LaserJet 3320mfp HP LaserJet 3320n mfp HP LaserJet 3330mfp HP LaserJet 3300 series hardware components Identifying your product’s hardware components Fax controls Identifying your product’s control panel components Alphanumeric buttons Menu and cancel controls Copy, scan, and start controls Identifying HP Jetdirect 310x print server components Identifying your product’s software components Getting started Finding a location for your product Connecting a printer cable to your product Sealing tape at the end of the cartridge Installing a print cartridge Installing and loading the media input trays Connecting the power cord Installing the ADF input tray To load originals onto the flatbed scanner Loading originals to copy or scan To load originals into the ADF input tray Verifying your work To self-test the copier using the ADF input trayTo self-test the printer To print a control panel menu map To self-test the copier using the flatbed scanner Changing your product’s general default settings Printing a configuration HP LaserJet 3300 series product settingsRestoring the factory default settings Printing a control panel menu map Using the product’s volume controls Changing the default paper sizeChanging the display panel language To change the volume for the fax product Changing settings from your computerTo change the ring volume of the fax product To change the control panel key press volume To change default settings across all applications Macintosh To change default settings across all applications Windows 40 3 Changing your product’s general default settings Printing Understanding print quality settings Stopping or canceling a print jobTo print using manual feed Printing with manual feed To change print quality settings for all future jobs To temporarily change print quality settingsTo enable EconoMode save toner Choose Device Configuration Optimizing print quality for media types To access the optimizing feature To print one envelope Printing envelopes To print multiple envelopes To print transparencies or labels Printing transparencies and labels To print letterhead or preprinted forms Printing letterhead or preprinted forms Printing on both sides of the media manual duplexing Printing custom-sized media or card stockTo print custom-sized media or card stock To duplex manually on lightweight media Page To print multiple pages on a single sheet Windows Printing multiple pages on a single sheet of mediaTo print multiple pages on a single sheet Macintosh To print booklets Printing booklets Printing watermarks To access the watermark feature Copying Adjusting copy quality for the current job Canceling a copy jobTo adjust the copy quality for the current job Starting a copy job Adjusting the default lighter/darker contrast setting Adjusting the default copy qualityTo adjust the copy quality To adjust the lighter/darker setting for the current job Reducing or enlarging copies for the current job Adjusting the default copy sizeTo reduce or enlarge copies for the current job Original 100% Legal to Letter 78% Legal to A4 83% To change the default copy size Changing the copy collation settingTo change the copy collation setting for the current job To change the default copy collation setting To change the default number of copies Using HP LaserJet Copier softwareTo access HP LaserJet Copier Windows or Macintosh Changing the number of copies To access HP LaserJet Copy Plus Windows Using HP LaserJet Copy Plus softwareTo access HP LaserJet Copy Plus Macintosh Click Copy and select, I want to copy to another printer To copy or scan a photo Copying photos, two-sided originals, or booksTo copy a multiple page stack of 2-sided originals To copy a book 64 5 Copying Scanning Scanning from the product’s control panel Understanding scanning methods To use the scan to button via network connection To use the scan to button via USB or parallel connectionTo reprogram the scan to button destinations Press start scan or menu/enter To scan using HP LaserJet Director Windows Canceling a scan jobScanning with the product software To reprogram the start scan button To use page-by-page scanning Windows To scan using HP LaserJet Director Macintosh To use page-by-page scanning Macintosh Scanning with TWAIN-compliant softwareTo use flatbed scanner preview scan Archiving scanned text or images To use the archive feature MacintoshTo archive a scanned image Scanning with OCR To use HP LaserJet Director’s OCR featureTo edit scanned text Windows and Macintosh To change the OCR word processing applicationPage Adding annotations to HP documents To access image enhancement features Windows Adding annotations to scanned image files To change the annotation settingsSending scanned items as e-mail attachments To scan to e-mail Windows To e-mail scanned files in an alternative mode Scanner resolution and colorTo scan to e-mail Macintosh Resolution and color guidelines Color Setting Recommended use Where to set the color value Faxing Setting the answer mode Setting the information in the fax headerTo set the answer mode To set the fax header Sending faxes Loading originals to faxTo load fax documents into the ADF input tray To send a fax to one recipient To send a fax to multiple recipients To send a fax using a group-dial codeTo send a fax to an ad hoc group Using manual dial Canceling a fax jobTo cancel the current fax job To cancel a fax job using fax job status Redialing manually Deleting faxes from memorySending a fax at a future time To delete faxes from memory Receiving faxes To receive faxes when you hear fax tonesTo send a fax at a future time To reprint a fax To block or unblock fax numbers Receiving faxes to your computer To program speed-dial codes and one-touch keys To turn the receive to PC setting off from the control panel To quickly program speed-dial codes or one-touch keys To delete speed-dial codes and one-touch keys To program a one-touch key for alternate long distance Managing group-dial codesTo program group-dial codes To delete an individual from a group-dial code To delete group-dial codes Deleting all phone book entries Using dialing charactersTo delete all phone book entries Dialing character table To insert a pause or wait Inserting a dial prefixTo set the dial prefix Using fax polling Using fax forwardingEnabling an extension phone To change the fax sounds line monitor volume Changing the HP LaserJet 3330 product’s volume settingsTo change the ring volume Sending a fax by dialing from a telephone Changing the default contrast Changing the default resolutionChanging the detect dial tone setting Changing how the product answers incoming faxes To set the answer mode to automatic or manualChanging rings-to-answer Changing answer ring patterns Changing the silence-detect mode To change the silence detect mode Changing autoreduction settings for incoming faxesTo enable stamp received faxes Enabling stamp received faxes Selecting tone- or pulse-dialing mode Setting the fax error correctionChanging redial settings To change the error correction setting Changing the V.34 setting Using billing codes Printing the fax activity log Managing fax logs and reportsTo print the fax activity log Setting fax call report print times Setting the fax activity log to print automaticallyPrinting a fax call report To set the fax activity log to print automatically Printing a phone book report Including the first page of each fax on the fax call reportPrinting the billing codes report To set fax call report print times Printing the block fax list Printing a T.30 protocol trace report To print all fax reports Printing all fax reports 106 7 Faxing Networking Using network protocols Understanding the print server’s features and benefitsSoftware installation Printing protocols Network connection requirements Model Product Connectors Firmware Supported protocol Version 110 8 Networking To connect the product to a network Installing the 310x print serverPage Using the embedded web server Installing the network softwarePrerequisites Compatible web browsers Using Bootp Using HP Web JetAdminTo start the embedded web server Bootptab file entries Setting up the Bootp serverNetWare Bootp servers Windows 2000 or NT servers Tag RFC Description Option Server sends syslog messages Windows NT Procedure Using DhcpUnix servers Windows NT 4.0 servers Windows 2000 servers Windows 2000 Procedure Changing the BOOTP/DHCP configuration method Configuring the print server for Dhcp configurationReturning to factory defaults To print a Jetdirect configuration Printing a print server configurationMoving to another network For more information Cleaning and maintenance To clean the exterior Cleaning the outside of the productTo clean the glass To clean the lid backing To clean the print cartridge area Cleaning the print cartridge area Cleaning the pickup roller Cleaning the printer media pathTo clean the printer media path To clean the pickup roller To change the pickup roller Changing the pickup rollerPage To change the printer separation pad Changing the printer separation padPage To install a new or replacement ADF Installing a new ADFPage Changing an ADF pickup roller assembly Page Removing and replacing the control panel bezel 136 9 Cleaning and maintenance Media Guidelines for using media Product media specificationsSupported media sizes printer Paper Symptom Problem with paper Solution Common media problems tableLabels Transparencies Card stock and heavy media Envelopes Selecting media for the ADF ADF specificationsCard stock construction Card stock guidelines 142 10 Media HP parts and accessories HP parts and accessories chart Ordering HP parts and accessoriesDescription or use Description or use Part number Power modules network model onlyCountries/Regions Part number Input rating Output rating HP policy on non-HP print cartridges HP LaserJet print cartridgesCountry/Regions Part number Input rating Output rating Storing print cartridges To install a print cartridge DIMMs memory or font To test a Dimm installation or removalPrint cartridge life expectancy Recycling print cartridges To install a Dimm Page To remove a Dimm 152 11 HP parts and accessories Troubleshooting printing problems Pages print but are totally blank Product will not turn on or print Onscreen error messages Pages printed, but there was a problemPages did not print Printed page is different from what appeared onscreen Paper handling problems Is the page format different than on another printer? Are graphics or text missing? Are there blank pages?Is graphics quality poor? To clear a media jam Clearing media jams Tips to avoid media jams To clear other media jams Light print or fade Improving print qualityToner specks Gray background Vertical lines Loose toner Toner smearVertical repetitive defects Skew Misformed characters Wrinkles or creases Curl or wave Critical error messages Control panel error messagesToner scatter outline Door Open or No Print Cartridge Alert messages Troubleshooting copy problems No copy came out Preventing problemsCopies are blank, or images are missing or faded Improving copy quality To clear a media jam from the ADF Clearing ADF media jamsTypical ADF jam locations Removing a jammed ADF Vertical white or faded stripes Identifying and correcting copy defects Too light or dark Blank pagesUnwanted lines Black dots or streaks Reduced size 174 13 Troubleshooting copy problems Troubleshooting scanning problems Part of the image did not scan or text is missing Scanned image is of poor quality Text cannot be edited Scan takes too long Error messages appear on the screen Improving scan quality Scanner did nothing Identifying and correcting scan defects Troubleshooting faxing problems Are you using the phone cord supplied with the product? Fax phone problemsWhat type of phone line are you using? Is the phone wall jack working properly? Is the document too large or too small for the ADF? Document stops feeding during faxing Outgoing fax calls keep dialing Product is receiving faxes but not sending themFaxes you send are not arriving Unable to start receiving faxes from an extension phone All of the numbers in a long fax number cannot be dialedIncoming fax calls are not being answered Are there too many devices connected to the phone line? Is the answer ring pattern feature turned on?Is the phone line working? Is the product out of paper? Faxes are not printing or are printing incorrectly Faxes are transmitting or being received very slowlyFaxes are printing on two pages instead of one Received faxes are too light or are printing only on half Are the activity log and call report settings correct? Volume is too high or lowDo the volume settings need to be adjusted? Troubleshooting network problems On and Ready Troubleshooting overviewIs your printer on and READY? USB OK? USB light on solid green? Is the USB light on solid green? What is the state of the USB light?USB light OFF Is the USB light now on solid green? Is the Power/Status light on solid green? Power/Status OK? Power/Status light on solid green?USB light blinking amber 10/100 link OK? 10 light or 100 light on solid green? Check the print server’s I/O status Error messages Configuration page does not print LAN Error Infinite Deferral LAN Error External LoopbackLAN Error Retry Faults LAN Error no Linkbeat Interpreting the configuration Message Description General information Network statistics USB port informationMessageDescription TCP/IP protocol information Total number of frames packets transmitted without error Value 202 16 Troubleshooting network problems Associated with each network number IPX/SPX protocol information Novell/NetWare protocol information DLC/LLC protocol information AppleTalk protocol information Error Code and Message Description Error messages Beat 208 16 Troubleshooting network problems Added to the list of queue servers 210 16 Troubleshooting network problems On the spooling server 212 16 Troubleshooting network problems Was not the BOOTP/DHCP server port 67/udp Browse hp.com Term Definition Glossary Glossary 217 File format 219 PPD 221 Glossary Appendix a Specifications and regulatory information Environmental specifications HP LaserJet 3300 series product specificationsElectrical specifications HP LaserJet 3300 series product Printer capacities and ratings Physical specificationsCopier capacities and ratings ADF specifications Laser safety statementMemory specifications Scanner capacities and ratings FCC regulations According to ISO/IEC Guide 22 and EN Declaration of Conformity Laser statement for Finland Canada DOC regulations HP LaserJet 3330 fax HP LaserJet 3330 product fax specificationsKorean EMI statement Japan Vcci Class B regulations Telephone consumer protection act US FCC Part 68 Requirements US HP Jetdirect 310x print server Supported networks HP Jetdirect 310x print server specifications Electromagnetic immunity SafetyElectromagnetic emissions FCC compliance According to ISO/IEC Guide 22 and EN45014 Canada AustraliaJapan Vcci Class 1 regulations Korean EMI statement Chinese safety statement Environmental product stewardship program US returns Non-US returns Paper Material safety data sheetsMaterial restrictions Extended warranty HP LaserJet 3300 series product batterySpare parts and consumables availability For more information Appendix a Specifications and regulatory information HP software license agreement Appendix B Warranties and licensing HP limited warranty statement HP limited warranty statement Appendix B Warranties and licensing Obtaining hardware service Appendix C Service and supportTo obtain hardware service Returning the unit Service information form Extended warrantyService information form Service information form Appendix C Service and support ADF Index Index See also media Index Loose 162 smear 162 specks 160 transparencies printing Page Copyright Hewlett-Packard Company