Error Code and Message

Description

 

 

12

With a 10/100Base-Tx port connected, Link Beat is not sensed. Check the

LAN ERROR- NO LINKBEAT

network cable, and verify that the concentrator or hub is providing Link

 

Beat.

 

 

13

Reset or power cycle the print server to enable the new configuration

NETWORK RECONFIG- MUST

values.

REBOOT

 

 

 

15

The configuration information for the NetWare functions is not stored

CONFIGURATION ERROR

correctly on the print server. Use the installation software, embedded web

 

server, or other tools to reconfigure the print server. If this error persists,

 

there may be a problem with the print server.

 

 

16

The print server has not been configured for NetWare. Use the installation

NOT CONFIGURED

software, embedded web server, or other tools to configure the print server

 

for NetWare networks.

 

 

17

The print server was unable to find the NetWare print server (in Remote

UNABLE TO FIND SERVER

Printer mode) or file server (in Queue Server mode). There was no

 

response to service queries for advertising print servers or file servers that

 

matched the configured print server or file server name.

 

Make sure that the print server or file server is running and that the print

 

server or file server name configured on the print server matches the actual

 

name used by the print server or file server. Also make sure that all cables

 

and routers are functioning correctly.

 

 

18

The print server detected that the password for the NetWare print server

PASSWORD ERROR

object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the

 

password for the print server object. When the print server logs on again, it

 

sets a new password.

 

Note: When multiple file servers are configured, the error is only displayed

 

on the configuration page if none of the file servers are connected.

 

 

19

The HP Jetdirect print server detected that the print server object has not

NO QUEUE ASSIGNED

been assigned any queues to service. Assign queues to the print server

 

object using printer installation or NetWare utilities.

 

Note: When multiple file servers are configured, the error is only displayed

 

on the configuration page if none of the file servers was successfully

 

connected.

 

 

1A

A NetWare printer number for this printer has not been configured. Assign a

PRINTER NUMBER NOT

valid printer number to the print server. Use a NetWare utility (such as

DEFINED

PCONSOLE), the Jetdirect embedded web server, or another tool to assign

 

a printer number.

 

 

1B

The NetWare printer number assigned to the printer is already in use by

PRINTER NUMBER IN USE

another printer. Assign an unused printer number. This may also occur

 

when a printer is power cycled, in which case the error goes away after the

 

print server times out and detects the lost connection.

EN

Interpreting the configuration page 207

Page 209
Image 209
Hitachi 3300MFP manual Beat