Manuals / Hitachi / Computer Equipment / Printer

Hitachi 3300MFP manual Tag RFC Description Option

Models: 3300MFP

1 259

Download 259 pages 52.29 Kb

Page 118

	Tag	RFC 2132	Description
		Option

	nodename	_	Name of the peripheral device. Identifies an entry point to a list of
			parameters for the specific peripheral device. Must be the first field in an
			entry. (In the example above, the nodename is picasso.)

	hn	12	Host name tag. This tag does not take a value but causes the BOOTP
			daemon to download the host name to the print server. The host name will
			be printed on the Jetdirect configuration page, or returned on an SNMP
			sysName request by a network application.

	ht	_	Hardware type tag. For this HP Jetdirect print server, set this to ether (for
			Ethernet). Must precede the ha tag.

	vm	_	The BOOTP report format tag (required). Set this tag to rfc1048.

	ha	_	Hardware address tag. The hardware (MAC) address is the link-level or
			station address of the HP Jetdirect print server. It can be found on the
			Jetdirect configuration page as the Hardware Address, and also printed on a
			label attached to the print server. The ht tag must precede this tag.

	ip	_	IP address tag (required). This will be the print server's IP address.

	sm	1	Subnet mask tag. The subnet mask will be used by the print server to
			identify the portions of an IP address that specify the network/subnetwork
			number and the host address.

	gw	3	Gateway IP address tag. This address identifies the IP address of the default
			gateway (router) that the HP Jetdirect print server will use for
			communications with other subnets.

	ds	6	DNS (Domain Name System) server’s IP address tag. Only a single name
			server can be specified.

	dn	15	Domain name tag. Specifies the domain name for the print server (for
			example, support.hp.com). It does not include the host name— it is not the
			Fully Qualified Domain Name (such as printer1.support.hp.com).

	ef	18	Extensions file tag that specifies the relative path name of the TFTP
			configuration file. This tag is similar to the vendor-specific tag T144.

	na	44	Tag for IP addresses of the NetBIOS-over-TCP/IP Name Server (NBNS). A
			primary and secondary server may be specified in order of preference.

	lease-time	51	DHCP IP address lease duration time (seconds).

	tr	58	DHCP T1 timeout, specifying the DHCP lease renewal time (seconds).

	tv	59	DHCP T2 timeout, specifying the DHCP lease rebind time (seconds).
116 8 Networking			EN

Image 118

Hitachi 3300MFP manual Tag RFC Description Option

Contents

Use Page User guide Copyright Information Contents Printing Scanning Page Networking Cleaning and maintenance Troubleshooting printing problems Troubleshooting scanning problems Troubleshooting network problems Appendix B Warranties and licensing Getting to know your product Identifying your product HP LaserJet 3300mfpHP LaserJet 3300se mfp HP LaserJet 3310mfp HP LaserJet 3320mfp HP LaserJet 3320n mfp HP LaserJet 3330mfp Identifying your product’s hardware components HP LaserJet 3300 series hardware componentsIdentifying your product’s control panel components Fax controlsMenu and cancel controls Alphanumeric buttonsIdentifying HP Jetdirect 310x print server components Copy, scan, and start controlsIdentifying your product’s software components Getting started Finding a location for your product Connecting a printer cable to your product Installing a print cartridge Sealing tape at the end of the cartridgeInstalling and loading the media input trays Installing the ADF input tray Connecting the power cordLoading originals to copy or scan To load originals onto the flatbed scannerTo load originals into the ADF input tray Verifying your work To self-test the copier using the ADF input trayTo self-test the printer To self-test the copier using the flatbed scanner To print a control panel menu mapChanging your product’s general default settings Restoring the factory default settings HP LaserJet 3300 series product settingsPrinting a configuration Printing a control panel menu mapUsing the product’s volume controls Changing the default paper sizeChanging the display panel language To change the ring volume of the fax product Changing settings from your computerTo change the volume for the fax product To change the control panel key press volumeTo change default settings across all applications Windows To change default settings across all applications Macintosh40 3 Changing your product’s general default settings Printing To print using manual feed Stopping or canceling a print jobUnderstanding print quality settings Printing with manual feedTo enable EconoMode save toner To temporarily change print quality settingsTo change print quality settings for all future jobs Choose Device ConfigurationTo access the optimizing feature Optimizing print quality for media typesPrinting envelopes To print one envelopeTo print multiple envelopes Printing transparencies and labels To print transparencies or labelsPrinting letterhead or preprinted forms To print letterhead or preprinted formsPrinting on both sides of the media manual duplexing Printing custom-sized media or card stockTo print custom-sized media or card stock To duplex manually on lightweight media Page To print multiple pages on a single sheet Windows Printing multiple pages on a single sheet of mediaTo print multiple pages on a single sheet Macintosh Printing booklets To print bookletsTo access the watermark feature Printing watermarksCopying To adjust the copy quality for the current job Canceling a copy jobAdjusting copy quality for the current job Starting a copy jobTo adjust the copy quality Adjusting the default copy qualityAdjusting the default lighter/darker contrast setting To adjust the lighter/darker setting for the current jobTo reduce or enlarge copies for the current job Adjusting the default copy sizeReducing or enlarging copies for the current job Original 100% Legal to Letter 78% Legal to A4 83%To change the copy collation setting for the current job Changing the copy collation settingTo change the default copy size To change the default copy collation settingTo access HP LaserJet Copier Windows or Macintosh Using HP LaserJet Copier softwareTo change the default number of copies Changing the number of copiesTo access HP LaserJet Copy Plus Macintosh Using HP LaserJet Copy Plus softwareTo access HP LaserJet Copy Plus Windows Click Copy and select, I want to copy to another printerTo copy or scan a photo Copying photos, two-sided originals, or booksTo copy a multiple page stack of 2-sided originals To copy a book 64 5 Copying Scanning Understanding scanning methods Scanning from the product’s control panelTo reprogram the scan to button destinations To use the scan to button via USB or parallel connectionTo use the scan to button via network connection Press start scan or menu/enterScanning with the product software Canceling a scan jobTo scan using HP LaserJet Director Windows To reprogram the start scan buttonTo scan using HP LaserJet Director Macintosh To use page-by-page scanning WindowsTo use page-by-page scanning Macintosh Scanning with TWAIN-compliant softwareTo use flatbed scanner preview scan Archiving scanned text or images To use the archive feature MacintoshTo archive a scanned image To edit scanned text Windows and Macintosh To use HP LaserJet Director’s OCR featureScanning with OCR To change the OCR word processing applicationPage To access image enhancement features Windows Adding annotations to HP documentsSending scanned items as e-mail attachments To change the annotation settingsAdding annotations to scanned image files To scan to e-mail WindowsTo e-mail scanned files in an alternative mode Scanner resolution and colorTo scan to e-mail Macintosh Resolution and color guidelines Setting Recommended use Where to set the color value ColorFaxing To set the answer mode Setting the information in the fax headerSetting the answer mode To set the fax headerTo load fax documents into the ADF input tray Loading originals to faxSending faxes To send a fax to one recipientTo send a fax to multiple recipients To send a fax using a group-dial codeTo send a fax to an ad hoc group To cancel the current fax job Canceling a fax jobUsing manual dial To cancel a fax job using fax job statusSending a fax at a future time Deleting faxes from memoryRedialing manually To delete faxes from memoryTo send a fax at a future time To receive faxes when you hear fax tonesReceiving faxes To reprint a faxReceiving faxes to your computer To block or unblock fax numbersTo turn the receive to PC setting off from the control panel To program speed-dial codes and one-touch keysTo delete speed-dial codes and one-touch keys To quickly program speed-dial codes or one-touch keysTo program a one-touch key for alternate long distance Managing group-dial codesTo program group-dial codes To delete group-dial codes To delete an individual from a group-dial codeTo delete all phone book entries Using dialing charactersDeleting all phone book entries Dialing character tableTo insert a pause or wait Inserting a dial prefixTo set the dial prefix Using fax polling Using fax forwardingEnabling an extension phone To change the ring volume Changing the HP LaserJet 3330 product’s volume settingsTo change the fax sounds line monitor volume Sending a fax by dialing from a telephoneChanging the default contrast Changing the default resolutionChanging the detect dial tone setting Changing how the product answers incoming faxes To set the answer mode to automatic or manualChanging rings-to-answer Changing the silence-detect mode Changing answer ring patternsTo enable stamp received faxes Changing autoreduction settings for incoming faxesTo change the silence detect mode Enabling stamp received faxesChanging redial settings Setting the fax error correctionSelecting tone- or pulse-dialing mode To change the error correction settingUsing billing codes Changing the V.34 settingPrinting the fax activity log Managing fax logs and reportsTo print the fax activity log Printing a fax call report Setting the fax activity log to print automaticallySetting fax call report print times To set the fax activity log to print automaticallyPrinting the billing codes report Including the first page of each fax on the fax call reportPrinting a phone book report To set fax call report print timesPrinting a T.30 protocol trace report Printing the block fax listPrinting all fax reports To print all fax reports106 7 Faxing Networking Software installation Understanding the print server’s features and benefitsUsing network protocols Printing protocolsModel Product Connectors Firmware Supported protocol Version Network connection requirements110 8 Networking Installing the 310x print server To connect the product to a networkPage Prerequisites Installing the network softwareUsing the embedded web server Compatible web browsersUsing Bootp Using HP Web JetAdminTo start the embedded web server NetWare Bootp servers Setting up the Bootp serverBootptab file entries Windows 2000 or NT serversTag RFC Description Option Server sends syslog messages Unix servers Using DhcpWindows NT Procedure Windows NT 4.0 serversWindows 2000 servers Windows 2000 Procedure Changing the BOOTP/DHCP configuration method Configuring the print server for Dhcp configurationReturning to factory defaults Moving to another network Printing a print server configurationTo print a Jetdirect configuration For more informationCleaning and maintenance To clean the glass Cleaning the outside of the productTo clean the exterior To clean the lid backingCleaning the print cartridge area To clean the print cartridge areaTo clean the printer media path Cleaning the printer media pathCleaning the pickup roller To clean the pickup rollerChanging the pickup roller To change the pickup rollerPage Changing the printer separation pad To change the printer separation padPage Installing a new ADF To install a new or replacement ADFPage Changing an ADF pickup roller assembly Page Removing and replacing the control panel bezel 136 9 Cleaning and maintenance Media Supported media sizes printer Product media specificationsGuidelines for using media PaperLabels Common media problems tableSymptom Problem with paper Solution TransparenciesEnvelopes Card stock and heavy mediaCard stock construction ADF specificationsSelecting media for the ADF Card stock guidelines142 10 Media HP parts and accessories HP parts and accessories chart Ordering HP parts and accessoriesDescription or use Description or use Part number Power modules network model onlyCountries/Regions Part number Input rating Output rating HP policy on non-HP print cartridges HP LaserJet print cartridgesCountry/Regions Part number Input rating Output rating To install a print cartridge Storing print cartridgesPrint cartridge life expectancy To test a Dimm installation or removalDIMMs memory or font Recycling print cartridgesTo install a Dimm Page To remove a Dimm 152 11 HP parts and accessories Troubleshooting printing problems Product will not turn on or print Pages print but are totally blankOnscreen error messages Pages printed, but there was a problemPages did not print Paper handling problems Printed page is different from what appeared onscreenIs the page format different than on another printer? Are graphics or text missing? Are there blank pages?Is graphics quality poor? Clearing media jams To clear a media jamTo clear other media jams Tips to avoid media jamsLight print or fade Improving print qualityToner specks Vertical lines Gray backgroundLoose toner Toner smearVertical repetitive defects Misformed characters SkewCurl or wave Wrinkles or creasesToner scatter outline Control panel error messagesCritical error messages Door Open or No Print CartridgeAlert messages Troubleshooting copy problems Copies are blank, or images are missing or faded Preventing problemsNo copy came out Improving copy qualityTo clear a media jam from the ADF Clearing ADF media jamsTypical ADF jam locations Removing a jammed ADF Identifying and correcting copy defects Vertical white or faded stripesUnwanted lines Blank pagesToo light or dark Black dots or streaksReduced size 174 13 Troubleshooting copy problems Troubleshooting scanning problems Scanned image is of poor quality Part of the image did not scan or text is missingText cannot be edited Error messages appear on the screen Scan takes too longScanner did nothing Improving scan qualityIdentifying and correcting scan defects Troubleshooting faxing problems What type of phone line are you using? Fax phone problemsAre you using the phone cord supplied with the product? Is the phone wall jack working properly?Document stops feeding during faxing Is the document too large or too small for the ADF?Outgoing fax calls keep dialing Product is receiving faxes but not sending themFaxes you send are not arriving Unable to start receiving faxes from an extension phone All of the numbers in a long fax number cannot be dialedIncoming fax calls are not being answered Is the phone line working? Is the answer ring pattern feature turned on?Are there too many devices connected to the phone line? Is the product out of paper?Faxes are printing on two pages instead of one Faxes are transmitting or being received very slowlyFaxes are not printing or are printing incorrectly Received faxes are too light or are printing only on halfAre the activity log and call report settings correct? Volume is too high or lowDo the volume settings need to be adjusted? Troubleshooting network problems Is your printer on and READY? Troubleshooting overviewOn and Ready USB OK? USB light on solid green?USB light OFF What is the state of the USB light?Is the USB light on solid green? Is the USB light now on solid green?Is the Power/Status light on solid green? Power/Status OK? Power/Status light on solid green?USB light blinking amber 10/100 link OK? 10 light or 100 light on solid green? Check the print server’s I/O status Configuration page does not print Error messagesLAN Error Retry Faults LAN Error External LoopbackLAN Error Infinite Deferral LAN Error no LinkbeatInterpreting the configuration General information Message DescriptionNetwork statistics USB port informationMessageDescription Total number of frames packets transmitted without error TCP/IP protocol informationValue 202 16 Troubleshooting network problems IPX/SPX protocol information Associated with each network numberNovell/NetWare protocol information AppleTalk protocol information DLC/LLC protocol informationError messages Error Code and Message DescriptionBeat 208 16 Troubleshooting network problems Added to the list of queue servers 210 16 Troubleshooting network problems On the spooling server 212 16 Troubleshooting network problems Was not the BOOTP/DHCP server port 67/udp Browse hp.com Glossary Term DefinitionGlossary 217 File format 219 PPD 221 Glossary Appendix a Specifications and regulatory information Electrical specifications HP LaserJet 3300 series product specificationsEnvironmental specifications HP LaserJet 3300 series productPrinter capacities and ratings Physical specificationsCopier capacities and ratings Memory specifications Laser safety statementADF specifications Scanner capacities and ratingsFCC regulations Declaration of Conformity According to ISO/IEC Guide 22 and ENCanada DOC regulations Laser statement for FinlandHP LaserJet 3330 fax HP LaserJet 3330 product fax specificationsKorean EMI statement Japan Vcci Class B regulations FCC Part 68 Requirements US Telephone consumer protection act USHP Jetdirect 310x print server HP Jetdirect 310x print server specifications Supported networksElectromagnetic immunity SafetyElectromagnetic emissions FCC compliance According to ISO/IEC Guide 22 and EN45014 Canada AustraliaJapan Vcci Class 1 regulations Korean EMI statement Chinese safety statement Environmental product stewardship program US returns Non-US returns Paper Material safety data sheetsMaterial restrictions Spare parts and consumables availability HP LaserJet 3300 series product batteryExtended warranty For more informationAppendix a Specifications and regulatory information Appendix B Warranties and licensing HP software license agreementHP limited warranty statement HP limited warranty statement Appendix B Warranties and licensing To obtain hardware service Appendix C Service and supportObtaining hardware service Returning the unitService information form Extended warrantyService information form Service information form Appendix C Service and support Index ADFIndex See also media Index Loose 162 smear 162 specks 160 transparencies printing Page Copyright Hewlett-Packard Company