Installing and loading the media input trays
1
3 |
4 |
To install and load the media input tray and the priority input tray, use the following steps:
1Slide the trays in and down at an angle until they fit securely. Remove the tape connecting the two trays.
2Remove the priority input tray.
3Push in the guides past the normal paper size mark.
4Roll the paper and place it in the tray.
5Push down on the paper so it lies flat in the tray.
6Push in the bottom guide so it is snug.
7Install the priority input tray over the media input tray.
Note
If the media guides are not sufficiently tight, your media may skew and cause a media jam.
5
6 |
EN | Installing and loading the media input trays 29 |
