Tandberg Data 2U LTO quick start Register Your Library AT, Additional Information

Page 8

StorageLoader 2U LTO

Quick Start Guide

Additional Information

Contact Tandberg Data for general information, sales, service and support at:

www.tandbergdata.com

Always check the website for the most up to date information.

IMPORTANT! Before moving or shipping the library, you must first “Park the Robot” and replace the shipping key or you will void your warranty.

From the library’s front panel, press the Maint / Library Maintenance / Park the Robot buttons.

After you receive the confirmation message (Park for Shipping Good), insert the shipping key by following the instructions in Step 4 in reverse order. See the Product Manual for additional information.

REGISTER YOUR LIBRARY AT:

www.tandbergdata.com

Copyright 2007 Tandberg Data, Exabyte, the Exabyte logo, EZ17, M2, VXA, and VXAtape are registered trademarks; ExaBotics, Mammoth- Tape, and SmartClean are trademarks; SupportSuite is a service mark. Linear Tape-Open, LTO, the LTO Logo, Ultrium and the Ultrium Logo are trademarks of HP, IBM, and Quantum in the US and other countries. All other product names are trademarks or registered trademarks of their respective owners.

P/N 1016989 A

April 2007

#1016989A#

Page 8 of 8

Image 8
Contents Host computer with adapter card installed Power cord for useBackup software ToolsConnecting the cables Before you beginUnpacking Lift unit only by the 2 sidesPowering on and Removing the Shipping Lock Shipping LockTOP Views for Reference only Preparing for and Performing a Backup Verifying the hardware installationAdding bar code labels and loading cartridges Use LTOTool toHome Screen Menu and Buttons Home Screen MenuTroubleshooting Tips Clean Tape Drive messageRegister Your Library AT Additional Information