Control Details
Generally the FW1082’s surface controls will function as expected, controlling their like parameters in Sonar. For example: Faders, Mutes, Solos and Transport Control will control those parameters in Sonar. Exceptions and specific details follow:
Additional Transport Keys
SET + REW = RTZ SET + FF = Go to Tail
IN locates to the beginning of the selection area OUT locates to the end of the selection area
SET + IN sets Punch IN point at the current playhead position SET + OUT sets Punch OUT point at the current playhead position
SET + REC starts automation recording. A parameter must be armed for automation. SHIFT + SET + IN sets Loop In Point at the current playhead position
SHIFT + SET + OUT sets Loop Out Point at the current playhead position SHIFT + IN = sets Selection In Point at the current playhead position SHIFT + OUT = sets Selection Out Point at the current playhead position <<LOCATE locates to previous marker
LOCATE>> locates to next marker
SET + LOCATE>> = Drop Marker at the current playhead position
Transport Wheel
·Turn the data wheel clockwise to jog forward or counterclockwise to jog backward.
·When the SHTL key is off, the data wheel moves the transport in one measure steps. Holding the SHIFT keyreduces this to onebeat steps.
·When the SHTL key is on, the data wheel moves the transport in 1000tick steps. Holding the SHIFT key reduces this to 100tick steps.
Special Keys
SHIFT + PLAY toggles the Audio Engine On/Off
SHIFT + STOP Resets Sonar
SHIFT + any SOLO key will unsolo all tracks.
SELect Keys
Pressing an FW1082 SELect key alone will select that channel in Sonar. Holding SHIFT while pressing SELect sets that channel’s fader to Unity in Sonar.
Holding the red REC keywhile pressing a SELect key will recordenable/disable that track.