M157305G
| ITEM NUMBER: 157305,306,307,308 |
| SERIAL NUMBER: |
| HP:______ Volts:______ Amp:______ Ph:_____ |
Proven Performance | RPM:____ PSI:____ GPM:____ Nozzle Size:_____ |
Max. Discharge Temperature:_____________ | |
| Pump:___________ Hose:______ Lance:_______ |
K - B A R I n d u s t r i e s , F a r i b a u l t , M N , 5 5 0 2 1 |
|
Installation, Operation, and Maintenance Manual
HOT WATER PRESSURE WASHER: Cleans dirty surfaces with high- pressure hot water.
To the Owner:
Thank you for purchasing a Northstar hot water pressure washer. Your machine is designed for long life, dependability, and the top performance you demand! Take time now to read through this manual so you will better understand the machine’s operation, maintenance and safety precautions. Everyone who operates this machine must read and understand this manual. The time you take now will prolong your machine’s life and prepare you for its safe operation. Enjoy the exceptional performance of your Northstar hot water pressure washer, the industry leader! The manufacturer reserves the right to make improvements in design and/or changes in specifications at any time without incurring any obligation to install them on units previously sold.
| Quick Facts | |
Pump Oil | Pump is shipped with oil. Change oil plug if and check pump oil level before starting. | |
| Use UTTO for Comet and Cat Pump oil (item# 22158) for Cat oil changes. | |
Water | Make sure your water flow is 20% higher than the pressure washer’s flow rate. | |
| Make sure your water is clean and particle free. | |
Storage | Do not allow water to freeze in the pump, hose, coil, or spray gun. | |
Spraying | Use any North Star brand or equivalent pressure washer chemicals. | |
Chemicals |
|
|
Maintenance | Pump Oil: change after first 50 hours, then every 3 months or 500 hours. |
|
Schedule |
|
|
Read and understand all manuals before operating.
Any Questions, Comments, Problems or Parts Orders
In the United States | In the United Kingdom |
Northstar Customer Service | Call 02392639752 |
Call | Northern Tool and Equipment Co. (UK) Ltd. |
Hours: Monday - Friday 7:00 AM to 5:30 PM | Unit 2, Keel Close, |
Saturday 7:30 | Portsmouth, Hants PO3 5QD, England |