North Star M157305G Cleaning The Inlet Filter, Checking the Tire Air Pressure, Burner Fuel Filter

Page 14

Cleaning The Inlet Filter

WARNING: Check whether dangerous chemicals have been used, and take precautions when handling filters.

Screen

FIG02300

A.) Unscrew clear tube by hand.

B.) Remove Inlet filter

C.) Run water though to clean filter

Checking the Tire Air Pressure

A.)

Remove air fill cap

B.)

Fill tire to 20psi (1.4bar)

C.)

Replace air fill cap

Air Fill Stem

Air Fill Cap

Burner Fuel Filter

Drain water which has accumulated in the fuel filter bowl and replace the filter as needed.

00425Filter

Water Drain

Checking the Hoses

WARNING: Do not use a finger or skin to check for leaks. Escaping fluid under pressure has sufficient force to penetrate the skin, causing serious injury. Do not operate the pressure washer if the hose is cracked, worn, or leaking.

A.) Check all hoses for leaks

B.) Check all hoses of worn areas

Good

Bad

Water

Bad

Wire Mesh

Changing The Pump Oil

*Change oil after first 50 hours, then every 3 months or 500 hours

1.) Remove oil drain plug on Cat pumps.

2.) Drain pump oil.

3.) Replace oil drain plug.

4.) Fill pump oil according to table below.

5.) Use dip stick to fill to proper level or sight glass on Cat pumps. On Comet pumps, fill with the correct measured amount of UTTO.

Quantities Of Fluid

Pump

Type of Fluid

QTY

Comet

UTTO*

5.0 oz (0.15L)

CAT

SAE 30**

8.5 oz (0.25L)

*Universal Tractor Transmission Oil of Mobil 1 15W50 **Non-Detergent Oil (order pump oil Item #22158)

Comet

Cat

Pump

Pump

Oil

 

Fill/Drain

Oil Fill

Oil Drain Plug (Underneath)

14

Image 14
Contents M157305G Item Number 157305,306,307,308Important Safety Instructions Table of ContentsGrounding Instructions Extension CordsDimensions Specifications Item NumberPower Requirements 157308Machine Component Identification Ref # DescriptionInstallation Instructions UnpackII. Assembly Instructions Description QtyIII. Pump Preparation Quantities Of FluidVI. Oil Burner Getting StartedVenting Air Band White Arrow Locking Burner ScrewII. Check Your Water Supply Operating InstructionsPre-Operation III. Before StartingVII. For Hot Water VI. Turn the pump switch onAttach Nozzle NozzleFor Steam Optional To StopMaintenance Mode Maintenance InstructionsSafety Relief II. High Temperature Limit Maintenance ScheduleBurner Fuel Filter Cleaning The Inlet FilterChecking the Tire Air Pressure Checking the HosesCoil Descaling Coil DesootingElectrodes Maneuvering Your Pressure Washer Moving and Handling InstructionsLong Term Storage Lifting Your Pressure WasherTroubleshooting Guide M157305G 157305,157306,157307 Parts List Description QTY Model Page