USING YOUR ARWH2
CHARGING
1.Attach the ARWH2 receiver to the transmitter as shown below, making sure the docking pins on the receiver match up to the holes on the transmitter, until it clicks into place. Also make sure the charge contacts on both units match up properly. You may need to move the belt clip slightly to do this.
2.Plug the combined ARWH2 unit into an available USB port on your computer. The indicator on the receiver flashes red when charging.
Charging the battery fully takes a few hours and the battery should last about 4 hours per charge.
The indicator on the receiver turns solid red when the battery is low.
Docking holes
Docking the receiver to the transmitter for charging
Charging the ARWH2
8