Myson 1370064 manual Preparation, Fixing

04SLIM-LINE RC

5.0Preparation

Before proceeding with the installation, unpack the carton contents and check against the checklist below:

1.SLIM-LINE RC unit.

2.15mm isolating valves (1 pair).

3.Instruction manual.

4.Warranty card.

5.Fixing kit (rubber mounts and cable gland).

6.Remote control handset.

6.0Fixing

●Using the fixing dimensions (see fig. 1), mark the fixing hole positions on the wall.

●Drill and plug the wall for No. 8 x 40mm round head wood screws ensuring that the wall plugs are suitable for the wall type.

●Remove the backing from the self-adhesive washers and place on screws with adhesive side towards the point.

●Tighten the screws into the wall leaving about 9mm projecting.

●Press adhesive washers to the wall.

●Remove outer case fixing screw at the bottom of the unit (see fig. 2).

●Lift off outer case.

●Fit chassis on to retaining screws and tighten.

Fig. 1