Myson 1370064 manual 150, Water Connections

7.0Water Connections

●Connect unit to system flow and return pipes using the two 15mm isolating valves (see fig. 2).

Note: To ensure effective venting of the heat exchanger the flow pipe should be connected to the bottom connection of the heat exchanger.

Note: For SLIM-LINE RC installations pipe-work must not be routed directly underneath the unit as this will adversely affect the operation of the integral room thermostat. If this cannot be avoided, the pipe-work must be boxed to prevent heat rise.

SLIM-LINE RC 05

●Ensure system is flushed in accordance with recognised best practice and a suitable inhibitor is added to the system as necessary.

●Open valves fully, check pipe connections for leaks and vent the heat exchanger - see Commissioning Procedure.

5.0

6.0

7.0

150

Fig. 2