New Holland
800TL Series Front-End Loader Specifications
Attachments for 800TL Series Loaders
Standard material buckets, in. (mm) | 63 - 102 | (1600 - 2591) | ||
73 - 102 | (1854 - 2591) | |||
63 - 83 |
| (1600 | - 2108) | |
Standard high capacity material bucket, in. (mm) | 79 - 102 | (2007 - 2591) | ||
High tipping bucket, in. (mm) | 91 (2311) | |||
85 (2159) | ||||
Manure fork, in. (mm) | 59 - 90 |
| (1499 | - 2286) |
Multi use fork, in. (mm) | 59 & 79 |
| (1499 | & 2007) |
Rock fork, in. (mm) | 59 & 79 |
| (1499 | & 2007) |
Pallet fork, in. (mm) | 38 & 47 | (965 & 1194) | ||
Pallet fork attachments, in. (mm) | Log Grapple, Bale | |||
.......................................................................................................................................................... | Spike & Lift Arm | |||
63 - 79 |
| (1600 | - 2007) | |
HD Silage King fork and grapple, in. (mm) | 51 - 98 |
| (1295 | - 2489) |
HD silage block cutter and grapple, in. (mm) | 44 - 75 |
| (1118 | - 1905) |
63 & 79 |
| (1600 | & 2007) | |
Universal bale grip, in. (mm) | 51 & 63 |
| (1295 | & 1600) |
Combo bale/pallet fork, in. (mm) | 71 (1803) | |||
Bale support for combo bale/pallet fork |
|
|
|
|
Bale size 23 - 80 (584 - 2032) | ||||
Bale split attachment | STD & HD | |||
Bale spike |
|
|
|
|
Round and large square bale fork | 2 Tines | |||
Square bale fork, in. (mm) | 55 & 75 |
| (1397 | & 1905) |
|
|
|
|
|
with tines & grapple, in. (mm) | 83 - 102 | (2108 - 2591) | ||
with tine holder, in. (mm) | 83 - 102 | (2108 - 2591) | ||
with grapple and extended floor, in. (mm) | 83 - 102 | (2108 - 2591) | ||
less tine holders, in. (mm) | 83 - 102 | (2108 - 2591) | ||
See your New Holland dealer for specific loader applications.
Visit our Web site at www.newholland.com/na Or, call
Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2007 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 7 of 7