Maintaining Your Lawn Mower, Cleaning the Lawn Mower

SECTION 6: MAINTAINING YOUR LAWN MOWER

WARNING: Always stop engine and disconnect spark plug wire before performing any maintenance or adjustments on the mower.

WARNING: Never tip mower more than 90 degrees in any direction and do not leave it tipped for long. Oil can drain into the upper part of the engine causing a starting problem.

Cleaning the Lawn Mower

•Clean underside of the mower deck after each use to prevent any build-up of grass. If this debris accumulates, it will cause rust and corrosion.

NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to electric components, spindles, pulleys, bearings or the engine. The use of water will result in shortened life and reduced serviceability.

•Disconnect spark plug wire. Drain gasoline from the mower, or place a piece of plastic under gas cap.

•Tilt the mower so that the side with the air cleaner is facing up. Hold the mower firmly.

•Scrape and clean the underside of the deck with a suitable tool. Do not spray with water.

•Put mower back on its wheels and remove plastic.

Engine Maintenance

A list of key maintenance jobs required for good performance by the mower is given below. Follow the engine manual for detailed list and instructions.

•Change engine oil as specified in the engine manual. Check oil level before starting engine every time.

•Service foam filter in the air cleaner as specified in the engine manual. Service air filter more frequently in extremely dusty conditions.

•Clean engine periodically. Remove dirt and debris with a cloth or brush.

•Clean spark plug and reset the gap to.030” at least once a season or every 50 hours of operation.

•Inspect muffler periodically, and replace if necessary. Damaged mufflers or spark arresters can create a fire hazard.

IMPORTANT: Make sure to avoid muffler and surrounding areas while the mower engine is hot because temperature of these areas of the engine may exceed 150o F.

Lubrication (See Figure 12 )

Wheels

•Lubricate the wheels and bearings, if so equipped, at least once a season with light oil or engine oil. Also, if the wheels are removed for any reason, lubricate the surface of the axle bolt and the inner surface of the wheel with light oil.

Chute Deflector & Rear Discharge Door

•Lubricate the torsion spring and the pivot point on each end of the rear discharge door using a light oil. This will prevent rusting.

Engine

•Follow the engine manual instructions and recommended schedule for lubricating engine.

Pivot Points

•Lubricate the pivot points on the discharge chute door, blade control handle and the cutting height adjustment lever at least once a season with light oil. The blade control handle must operate freely in both directions. The cutting height adjustment levers should be able to move easily.

Lubricate

Lubricate		Follow engine manual
		for lubrication

Lubricate

Figure 12

435 specifications

The MTD 435 is a versatile and reliable lawn mower that caters to both amateur gardeners and professional landscapers. With its blend of power, performance, and user-friendly features, the MTD 435 stands out in a crowded market.

One of the most notable features of the MTD 435 is its robust engine. Powered by a reliable combustion engine, this mower delivers consistent performance while ensuring optimal fuel efficiency. The engine's design minimizes emissions, making it an environmentally friendly choice for landscape maintenance. Additionally, the mower offers a self-propelled option that allows users to cover large areas with ease, reducing fatigue during prolonged use.

The cutting width of the MTD 435 is impressive, enabling fast mowing for expansive lawns. This lawn mower is equipped with adjustable cutting heights, allowing users to customize the grass length to their preferences. The ease of adjustment is facilitated by a simple lever, ensuring that anyone can achieve the desired results without fuss.

The MTD 435 features a durable steel deck construction that not only enhances its longevity but also withstands the rigors of regular use. This robustness ensures that the mower can handle different terrains, whether it be bumpy lawns or flat grass areas. The mower also comes equipped with high-quality cutting blades that provide precise and clean cuts, promoting healthier grass growth.

In terms of technology, the MTD 435 boasts an ergonomic design that enhances user comfort. The adjustable handlebar enables operators to find the most comfortable grip, reducing strain on the back and arms. Furthermore, the mower's lightweight construction allows for effortless maneuverability, even in tight spaces.

Maintenance is a breeze with the MTD 435, thanks to its easy-access components. User-friendly features, such as a quick-release lever for the grass collection bag, simplify the mowing process significantly. This collection bag is generously sized, ensuring less frequent emptying, which translates to more uninterrupted mowing time.

In summary, the MTD 435 is a powerful and efficient lawn mower that combines advanced technologies with practical features. Its robust engine, adjustable cutting heights, and user-friendly design position it as an excellent choice for anyone seeking to maintain a pristine lawn with ease. Whether you're a casual homeowner or a dedicated gardener, the MTD 435 is equipped to handle all your lawn care needs.