MTD 435 manual Your Responsibility, General Service

Page 5

7.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

8.Never fuel machine indoors because flammable vapors will accumulate in the area.

9.Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at least two minutes before refueling.

10.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

11.Replace gasoline cap and tighten securely.

12.If gasoline is spilled, wipe it off the engine and equipment. Move unit to another area. Wait 5 minutes before starting the engine.

13.Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

14.To reduce fire hazard, keep mower free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

15.Allow a mower to cool at least 5 minutes before storing.

General Service

1.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

2.Before cleaning, repairing, or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

3.Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., bent, cracked, worn) Replace blade with the original equipment manufacture’s (O.E.M.) blade only, listed in this manual. “Use of parts which do not meet the original equipment specifications may

lead to improper performance and compromise safety!”

4.Mower blades are sharp and can cut. Wrap the blade or wear gloves, and use extra caution when servicing them.

5.Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

6.Never tamper with safety devices. Check their proper operation regularly.

7.After striking a foreign object, stop the engine, disconnect the spark plug wire and ground against the engine. Thoroughly inspect the mower for any damage. Repair the damage before starting and operating the mower.

8.Never attempt to make a wheel or cutting height adjustment while the engine is running.

9.Grass catcher components, discharge cover, and trail shield are subject to wear and damage which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and replace immediately with original equipment manufacturer’s (O.E.M.) parts only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

10.Do not change the engine governor setting or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

11.Maintain or replace safety and instruction labels, as necessary.

12.Observe proper disposal laws and regulations. Improper disposal of fluids and materials can harm the environment.

Your Responsibility

•Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

1299 AC

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesChildren ServiceSlope Operation Do NotYour Responsibility General ServiceSlope Gauge Assembling Your Lawn Mower Disconnecting Spark PlugRemoving Unit From Carton Tools RequiredAttaching Starter Rope Grass Catcher AssemblyAttaching Grass Catcher Assembling Soft Grass BagRemoving Grass Catcher Know Your Lawn MowerGas and Oil Fill-Up Operating Your Lawn MowerBefore Starting Mower Starting EngineAdjusting Cutting Height Using the MulcherOperating Your Lawn Mower Bagging Grass ClippingsMaintaining Your Lawn Mower Cleaning the Lawn MowerEngine Maintenance To Sharpen Blade Servicing Your MowerBlade Care Adjusting Handle Height Making AdjustmentsAdjusting Carburetor Replacing Rear FlapMower TROUBLE-SHOOTING GuideGasoline Parts List for Model Model Shroud Chart Page MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio 44136-0019 Phone MANUFACTURER’S Limited Warranty for

435 specifications

The MTD 435 is a versatile and reliable lawn mower that caters to both amateur gardeners and professional landscapers. With its blend of power, performance, and user-friendly features, the MTD 435 stands out in a crowded market.

One of the most notable features of the MTD 435 is its robust engine. Powered by a reliable combustion engine, this mower delivers consistent performance while ensuring optimal fuel efficiency. The engine's design minimizes emissions, making it an environmentally friendly choice for landscape maintenance. Additionally, the mower offers a self-propelled option that allows users to cover large areas with ease, reducing fatigue during prolonged use.

The cutting width of the MTD 435 is impressive, enabling fast mowing for expansive lawns. This lawn mower is equipped with adjustable cutting heights, allowing users to customize the grass length to their preferences. The ease of adjustment is facilitated by a simple lever, ensuring that anyone can achieve the desired results without fuss.

The MTD 435 features a durable steel deck construction that not only enhances its longevity but also withstands the rigors of regular use. This robustness ensures that the mower can handle different terrains, whether it be bumpy lawns or flat grass areas. The mower also comes equipped with high-quality cutting blades that provide precise and clean cuts, promoting healthier grass growth.

In terms of technology, the MTD 435 boasts an ergonomic design that enhances user comfort. The adjustable handlebar enables operators to find the most comfortable grip, reducing strain on the back and arms. Furthermore, the mower's lightweight construction allows for effortless maneuverability, even in tight spaces.

Maintenance is a breeze with the MTD 435, thanks to its easy-access components. User-friendly features, such as a quick-release lever for the grass collection bag, simplify the mowing process significantly. This collection bag is generously sized, ensuring less frequent emptying, which translates to more uninterrupted mowing time.

In summary, the MTD 435 is a powerful and efficient lawn mower that combines advanced technologies with practical features. Its robust engine, adjustable cutting heights, and user-friendly design position it as an excellent choice for anyone seeking to maintain a pristine lawn with ease. Whether you're a casual homeowner or a dedicated gardener, the MTD 435 is equipped to handle all your lawn care needs.
Top Page Image Contents