MTD 190-182,190-180 warranty Attaching Discharge Chute, All Model Series

Page 10

6

Attaching

Discharge

Chute

All Model Series

NOTE:

The retainer strap is fitted at position A on the discharge chute.

However, on older models of tractors, you will have to change the position of the strap depend- ing on the location of the grass catcher pin on the deck. Remove the retainer strap from position A on the discharge chute to position B or C corresponding to the position of the grass catcher pin at A, B or C on the deck. See Fig. 6-3.

Attaching Discharge

Chute

1.On some older models, a clip is already installed on the cutting deck next to the discharge chute opening in position A, B, or C, as seen in Fig. 6-1. If this is the case, the clip must be removed and a grass catcher pin installed.

2.Pin Installation: A grass catcher pin (E1 in Fig. 2-2) and nut (E2 in Fig. 2-2) have been supplied in the hardware pack. First remove the clip (if present), as seen in Fig. 6-2A, by removing the nut and bolt. Then attach the grass catcher pin as seen in Fig.

6-2B. Make sure to secure the pin tightly.

3.Some units may not have clip, but will have an open hole for pin installation. In this case, install the grass catcher pin from the hardware pack in the available hole.

4.You will then need to position the retainer strap on the discharge chute to correspond with the hole and pin. See Fig. 6-3 for retainer strap positioning.

NOTE: The retainer strap is fitted at position A on the discharge chute. However, on older models of trac- tors, you will have to change the position of the strap depending on the location of the grass catcher pin on the deck. Remove the retainer strap from position A on the discharge chute to position B or C corresponding to the position of the grass catcher pin at A, B or C on the deck. See Fig. 6-3.

Figure 6-1

AB

Figure 6-2

Discharge Chute

Figure 6-3

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Twin Rear Bagger Kit 2007Finding and Recording Model Number Customer SupportRider Model Identification FastAttach Twin Bag Grass CollectorDetermine The Model Your Rider Model PlateCarton Contents Contents of Hardware Pack Before assembly Attaching Bracket AssemblyAttaching The Bracket Assembly Model SeriesIf the grass Attaching Support Bracket AssemblyAssembling Support Brackets Clevis pin Hairpin clip mayPlace the support tube in position on the rear of unit Attaching Grass Bags CoverAttaching Grass Bags Grass Bag Cover Deck your tractor is equipped with. Refer to FigIf your tractor is Attaching The BladesAttaching Blades In-1 cutting bladesAttaching Discharge Chute All Model SeriesWhen both grass Bags are full, place Tractor on a Bagger UsageFor Deck 41 47 Part List Screw 1/4-20 x Hex Head Screw 1/4-20 x 710-1260AModelos 190-180 Asistencia al cliente Búsqueda y registro del número de modeloNúmero de serie Determine el modelo de la podadora tractor Identificación Del modelo De podadora TractorColector de césped FastAttach con Sistema de bolsa doble Placa de modeloContenido DE Cartón Contenido DE Paquete DE Hardware Para facilitar elModelos series Instalación Conjunto de SoporteInstalación Conjunto de soporte Modelos SeriesInstalación del conjunto Del soporte Del Conjunto del SoporteEnsamblado de los Soportes Modelo SerieInstalación BolsasInstalación de Las cuchillas Vuelva a instalar la plataforma de cortePosicionamiento de la tira de retención Instalación del canal de DescargaInstalación del pasador Dentro del paquete de De césped en la plataforma. Vea la FiguraEleve la plataforma a la posición más alta Uso de la embolsadoraTodas las series de Modelos Dé vuelta el asiento hacia arribaCollecteur arrière à deux sacs En attachant Lames 46 Pont Pose seulement Pour trouver et enregistrer le numéro de modèleSupport client Numéro de sérieDéterminer le modèle De votre tracteur IdentificationCollecteur d’herbe à Deux sacs FastAttach Plaque-modèleContenu DU Carton Contenu du CartonCouvercle du collecteur ’herbe Tube de goulotte Chaque composant Pièces DE Quincaillerie# = Quantité Boulons à épaulement 1. Basculez la base du Montage du support de FixationModèles de série Insérez la broche B1 dans la FigueModèle de la série Montage duMontage des paliers Supports Modèle de la sérieVercle Montage des sacs à herbe et du couvercleUtilisant les instructions Suivantes Le fait ’Attacher les LamesLe fait d’Attacher les Lames Enlevez les lames du pont aigu de votre tracteur comme suitMontage de la goulotte ’éjection Montage deToute la Série Modèle Utilisation du collecteur Tous les modèlesMTD LLC, P.O. BOX 361131 CLEVELAND, Ohio

190-182,190-180 specifications

The MTD 190-182 and MTD 190-180 represent a pair of innovative lawn and garden equipment models designed to meet the diverse needs of homeowners and landscaping professionals alike. These models stand out in the market due to their combination of robust performance, advanced technology, and user-friendly features.

One of the main features of the MTD 190-182 and MTD 190-180 is their powerful engines. Both models are equipped with reliable, high-performance engines that provide ample power for various tasks, from mowing lawns to clearing debris. The engines are designed for efficiency, delivering optimal torque and speed while ensuring fuel economy. This makes them suitable for both residential and light commercial applications.

In terms of cutting technology, both models incorporate precision-engineered mowing decks with advanced cutting systems. These decks are designed to produce a clean and even cut, promoting healthy grass growth and enhancing the overall appearance of lawns. Additionally, they often come with adjustable cutting heights, allowing users to customize the mowing experience based on grass type and desired lawn aesthetics.

Another noteworthy aspect of the MTD 190-182 and MTD 190-180 is their ergonomic design. These models prioritize user comfort with features such as adjustable seats, easy-grip steering, and intuitive controls. Such design elements reduce operator fatigue, making it easier to tackle larger mowing tasks over extended periods.

The technology incorporated into these models also sets them apart. Many versions come equipped with smart technology features, including easy-start mechanisms and maintenance reminders. Users can also find innovative solutions for grass collection through robust bagging systems, which enhance efficiency during the mowing process.

Durability is a key characteristic of both models, as they are built using high-quality materials intended to withstand various weather conditions and rigorous use. Heavy-duty frames, reinforced components, and rust-resistant finishes contribute to the longevity of these machines, ensuring they can handle tough landscaping jobs without compromising performance.

In summary, the MTD 190-182 and MTD 190-180 offer a compelling combination of power, precision, and comfort. With their advanced engines, ergonomic designs, cutting-edge technology, and durable construction, these models have become essential tools for anyone looking to maintain a pristine outdoor environment. Whether for residential use or light commercial applications, these MTD models are engineered to deliver reliable results season after season.
Top Page Image Contents