MTD 190-182,190-180 warranty Attaching The Blades, Attaching Blades, If your tractor is

Page 9

Smaller Blade

Part No. 742-0645

 

 

Attaching The Blades

 

NOTE: If your tractor is equipped with a 46” cutting deck,

 

three 2-in-1 cutting blades are included with this kit. For

 

improved bagging performance, install these blades on

 

your tractor using the following instructions.

 

Remove the blades from your tractor’s cutting deck as

 

follows:

 

1.

Remove the cutting deck from beneath the tractor,

 

Larger Blades

(refer to Deck Removal in the MAINTENANCE

Hex Flange Nut

Part No. 742-0644

section of your tractor’s operator’s manual for detailed

 

instructions) then gently flip the deck over to expose

 

 

Figure 5-1

 

its underside.

2.

Place a block of wood between the center deck hous-

 

 

 

ing baffle and the cutting blade to act as a stabilizer,

 

 

keeping the blades from turning when you loosen the

 

 

hex flange nuts.

 

3.

Use a 15/16” wrench to remove the hex flange nut that

 

 

secures the blade to the spindle assembly.

NOTE: The hex flange nut has a normal (right-handed)thread pattern. Do NOT attempt to force the nut in the incorrect direction. Doing so may damage the nut and create a safety hazard.

4.Install the new blades packed with the bagger. Be sure to install the blade with the side of the blade marked ‘‘Bottom’’ (or with a part number stamped in it) facing the ground when the rider is in the operating position.

5.Mount the SMALLER of the three blades to the CENTER spindle. The remaining two blades are interchangeable. See Fig. 5-1.

6.Use a torque wrench to tighten the blade spindle hex flange nut to between 70 and 90 foot-pounds.

7.Remount the cutting deck.

5

Attaching

The Blades

46-Inch Cutting

Deck Models Only

NOTE:

If your tractor is

equipped with a 46” cutting deck, three

2-in-1 cutting blades

are included with this kit. For proper bagging performance, install these blades on your tractor using the following instructions.

NOTE:

The hex flange nut has a normal (right- handed) thread pattern. Do NOT attempt to force the nut in the incorrect direction. Doing so may damage the nut and create a safety hazard.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 2007 Twin Rear Bagger KitCustomer Support Finding and Recording Model NumberDetermine The Model Your Rider FastAttach Twin Bag Grass CollectorRider Model Identification Model PlateCarton Contents Contents of Hardware Pack Attaching The Bracket Assembly Attaching Bracket AssemblyBefore assembly Model SeriesAssembling Support Brackets Attaching Support Bracket AssemblyIf the grass Clevis pin Hairpin clip mayAttaching Grass Bags Grass Bag Cover Attaching Grass Bags CoverPlace the support tube in position on the rear of unit Deck your tractor is equipped with. Refer to FigAttaching Blades Attaching The BladesIf your tractor is In-1 cutting bladesAll Model Series Attaching Discharge ChuteBagger Usage When both grass Bags are full, place Tractor on aFor Deck 41 47 Screw 1/4-20 x Hex Head Screw 1/4-20 x 710-1260A Part ListModelos 190-180 Búsqueda y registro del número de modelo Asistencia al clienteNúmero de serie Colector de césped FastAttach con Sistema de bolsa doble Identificación Del modelo De podadora TractorDetermine el modelo de la podadora tractor Placa de modeloContenido DE Cartón Para facilitar el Contenido DE Paquete DE HardwareInstalación Conjunto de soporte Instalación Conjunto de SoporteModelos series Modelos SeriesEnsamblado de los Soportes Del Conjunto del SoporteInstalación del conjunto Del soporte Modelo SerieBolsas InstalaciónVuelva a instalar la plataforma de corte Instalación de Las cuchillasInstalación del pasador Dentro del paquete de Instalación del canal de DescargaPosicionamiento de la tira de retención De césped en la plataforma. Vea la FiguraTodas las series de Modelos Uso de la embolsadoraEleve la plataforma a la posición más alta Dé vuelta el asiento hacia arribaCollecteur arrière à deux sacs Support client Pour trouver et enregistrer le numéro de modèleEn attachant Lames 46 Pont Pose seulement Numéro de sérieCollecteur d’herbe à Deux sacs FastAttach IdentificationDéterminer le modèle De votre tracteur Plaque-modèleContenu du Carton Contenu DU CartonCouvercle du collecteur ’herbe Tube de goulotte Pièces DE Quincaillerie Chaque composant# = Quantité Modèles de série Montage du support de FixationBoulons à épaulement 1. Basculez la base du Insérez la broche B1 dans la FigueMontage des paliers Supports Montage duModèle de la série Modèle de la sérieMontage des sacs à herbe et du couvercle VercleLe fait d’Attacher les Lames Le fait ’Attacher les LamesUtilisant les instructions Suivantes Enlevez les lames du pont aigu de votre tracteur comme suitMontage de Montage de la goulotte ’éjectionToute la Série Modèle Tous les modèles Utilisation du collecteurMTD LLC, P.O. BOX 361131 CLEVELAND, Ohio

190-182,190-180 specifications

The MTD 190-182 and MTD 190-180 represent a pair of innovative lawn and garden equipment models designed to meet the diverse needs of homeowners and landscaping professionals alike. These models stand out in the market due to their combination of robust performance, advanced technology, and user-friendly features.

One of the main features of the MTD 190-182 and MTD 190-180 is their powerful engines. Both models are equipped with reliable, high-performance engines that provide ample power for various tasks, from mowing lawns to clearing debris. The engines are designed for efficiency, delivering optimal torque and speed while ensuring fuel economy. This makes them suitable for both residential and light commercial applications.

In terms of cutting technology, both models incorporate precision-engineered mowing decks with advanced cutting systems. These decks are designed to produce a clean and even cut, promoting healthy grass growth and enhancing the overall appearance of lawns. Additionally, they often come with adjustable cutting heights, allowing users to customize the mowing experience based on grass type and desired lawn aesthetics.

Another noteworthy aspect of the MTD 190-182 and MTD 190-180 is their ergonomic design. These models prioritize user comfort with features such as adjustable seats, easy-grip steering, and intuitive controls. Such design elements reduce operator fatigue, making it easier to tackle larger mowing tasks over extended periods.

The technology incorporated into these models also sets them apart. Many versions come equipped with smart technology features, including easy-start mechanisms and maintenance reminders. Users can also find innovative solutions for grass collection through robust bagging systems, which enhance efficiency during the mowing process.

Durability is a key characteristic of both models, as they are built using high-quality materials intended to withstand various weather conditions and rigorous use. Heavy-duty frames, reinforced components, and rust-resistant finishes contribute to the longevity of these machines, ensuring they can handle tough landscaping jobs without compromising performance.

In summary, the MTD 190-182 and MTD 190-180 offer a compelling combination of power, precision, and comfort. With their advanced engines, ergonomic designs, cutting-edge technology, and durable construction, these models have become essential tools for anyone looking to maintain a pristine outdoor environment. Whether for residential use or light commercial applications, these MTD models are engineered to deliver reliable results season after season.
Top Page Image Contents