M&S Systems dmc1 manual Amplifier Mounting, Satellite Speakers

Page 12
Figure 17 – Amplifier mounting

dmc1

Figure 13 – Stereo wiring connections

Figure 14 – Mono wiring connections

Satellite Speakers

At each speaker location, strip approximately 4 Inches of jacket from the MS2SXSC cables and separate the colored wires from each other. Strip 1/2 Inch of insulation from each wire. Connect the

MS2SXSC cable to the speaker as shown in figure 8. NOTE: The bare drain wire from the cable is not

connected and should be cut off. On speakers equipped with RED and BLACK terminals, connect

the BLUE wire to the BLACK terminal and the VIOLET wire to the RED terminal.

Amplifier Mounting

Figure 16 – Speaker connections

The amplifier module will install on a single vertical stud previously marked during rough-in. The vertical height of the amplifier will allow complete coverage over the wall openings for the remote volume controls and control panel wiring. Mark the location of the top mounting keyhole and bottom mounting holes. With the amplifier removed verify the location of the vertical stud by installing the enclosed mounting screws at the marked

locations. Once the location of the stud has been verified, remove the screws. Remove the

cover from the amplifier. While positioning the amplifier (with cover removed) into position, bring the volume control and preamp cabling through the holes provided. Secure the amplifier to the wall in the

www.mssystems.com 800.421.1587

Page 12

Image 12
Contents Dmc1 Finish-Out Instructions Introduction Instructions Dmc1 Installing the Room Station Finish-Out InstructionsPatio Station DMC1RW Attaching the room station to the wallSatellite Volume Control MVC1 Series Dmc1 Master Installation Door StationsSee figure Wireless Remote Control Connection Antenna ConnectionPower Amp Finish-out Satellite Volume ControlsDoor Release Connection Amplifier Mounting Satellite SpeakersWiring connections Dmc1 ConnectionStereo/Mono Configuration Other SourcesPowering Up The dmc1 DMC1 speaker cover installationSystems 2-Year Warranty

dmc1 specifications

M&S Systems DMC1 is an advanced digital music controller that has garnered attention for its cutting-edge features and robust capabilities. Designed primarily for professional audio setups, the DMC1 is ideal for DJs, live performers, and sound engineers who require precise control over their music and sound manipulation.

One of the standout features of the DMC1 is its intuitive user interface. It boasts a sleek and user-friendly design, allowing users to navigate through different functions with ease. The device incorporates a high-resolution display that provides real-time feedback on audio levels, track progress, and various settings, making it straightforward to operate even in fast-paced environments.

Technologically, the DMC1 leverages advanced connectivity options. It supports USB, MIDI, and various audio input/output formats, ensuring compatibility with a wide range of devices, including computers, audio interfaces, and traditional DJ equipment. This versatility allows users to seamlessly integrate the DMC1 into their existing setups without the need for additional adapters or converters.

Another key characteristic of the DMC1 is its powerful audio processing capabilities. It features high-fidelity audio converters that deliver crystal-clear sound reproduction, essential for both live performances and studio recordings. The device also includes built-in effects such as reverb, echo, and filters, enabling users to creatively manipulate their audio on the fly.

The DMC1 is designed with durability in mind, featuring a robust construction that can withstand the rigors of on-the-road use. The controls are designed to be responsive and reliable, ensuring they can handle the intense demands of live performances without glitching or failing.

Moreover, the DMC1 is equipped with customizable settings, allowing users to create personalized profiles to match their playing style or specific performance needs. This level of customization ensures that artists can maintain their unique sound even when utilizing a new piece of equipment.

In summary, the M&S Systems DMC1 combines advanced technology, user-friendly design, and robust features to create a powerful tool for any audio professional. With its adaptability, high sound quality, and creative possibilities, it stands out as a premier choice for anyone serious about their sound.