MTD Series 410 thru 420 warranty Slope Gauge

Page 3

Use this page as a guide to determine slopes where you may not operate safely.

Do not operate your lawn mower on such slopes.

—

3IGHTGANDTHOLD THIS LEVELLWITH A VERTICALLTREE

OR A

OR A CORNERCOF A BUILDING

FENCE POST

 

1

Slope

Gauge

WARNING

Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately

2-1/2 feet every 10 feet). A riding mower could overturn and cause serious injury. If operating a walk- behind mower on such a slope, it is extremely difficult to maintain your footing and you could slip, resulting in serious injury.

Operate RIDING mowers up and down slopes, never across the face of slopes.

Operate

WALK-BEHIND mowers across the face of slopes, never up and down slopes.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Rotary Mower Model Series 410 thru MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio25/2006 Table of Contents Finding and Recording Model NumberCustomer Support Slope Gauge Your Responsibility Safe Operation PracticesSlope Operation Setup Adjustment Positioned at the same height AdjustmentsNever operate mower Depress lever towards wheelKnow Your Lawn Mower Operating Your Lawn MowerStarting Engine Using Your Lawn MowerUsing as Mulcher Using Grass CatcherMaintaining Your Lawn Mower Off-Season Storage For sharpening or Replacement, protect Your hands with aBlade Care Replacing Rear FlapListed here, contact Trouble ShootingProblem Cause Remedy For repairs beyondSafety Label Found On Your Lawn Mower Safety LabelsModel Series 410 Parts List To order replacement Parts, contact Or visit‡ Wheel Chart Type Tread MANUFACTURER’S Limited Warranty for
Top Page Image Contents