Adjusting Your LOG Splitter, Wedge Assembly, Gib

WARNING: Do not tow faster than 45mph. Check local, state, and federal requirements before towing on any public road.

NOTE: Use caution when backing up. It is recommended to use a spotter outside the vehicle.

SECTION 5: ADJUSTING YOUR LOG SPLITTER

WARNING: Do not at any time make any adjustments without first stopping engine, disconnecting spark plug wire, and grounding it against the engine. Always wear safety glasses during operation or while performing any adjustments or repairs.

Wedge Assembly

As normal wear occurs and there is excessive “play” between the wedge and beam, adjust the bolts on the side of the wedge assembly to eliminate excess space between the wedge and the beam. See Figure 10.

•Loosen the jam nuts on the two adjustment bolts on the side of the wedge. Turn the adjustment bolts in until snug and then back them off slowly until the wedge assembly will slide on the beam.

•Tighten the jam nuts securely against the side of the wedge to hold the adjustment bolts in this position.

Gib

Periodically remove and replace the “gibs” (spacers) between the wedge assembly and the back plate. See Figure 10.

NOTE: The gibs may be rotated and/or turned over for even wear.

•Loosen the lock nuts under each back plate and slide the gibs out.

•Turn or replace the gibs.

•Reassemble the back plate and secure with the lock washers and lock nuts.

•Readjust the bolts on the side of the wedge assembly.

Adjustment
Bolt
	Gibs
Jam Nut
Lock Nut	Lock
	Washer

Figure 10

SECTION 6: MAINTAINING YOUR LOG SPLITTER

WARNING: Before cleaning, lubricating, repairing, or inspecting, disengage the control lever and stop engine. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting. Always wear safety glasses during operation or while performing any adjustments or repairs.

Conditions That Will Void Warranty

1.Failure to maintain proper fluid level in reservoir.

2.Changing the relief valve setting or pressure adjustment of control valve without proper knowledge and instruction from the factory.

3.Disassembling the pump.

4.Use of incorrect hydraulic fluid.

5.Allowing the flexible pump coupler to deteriorate

WARNING: Higher pressure could cause the hoses to burst, cylinder to rupture, and intense fluid to be released, which could result in serious personal injury.

without proper and regular inspection.

6.Lack of lubrication or improper lubrication of the beam or unit.

7.Improper adjustment of splitting wedge.

8.Excessive heating of the hydraulic system.

9.Attempting to start unit in temperatures under 20°F without pre-heating fluid in reservoir.

10.Unattended leaks in hydraulic system.

Hydraulic Fluid

•Check the hydraulic fluid level in the log splitter reservoir tank before each use.

500, 510 specifications

The MTD 500 and MTD 510 are innovative machines designed for efficiency and versatility in various agricultural applications. These models are engineered to meet the rigorous demands of modern farming, offering exceptional performance and reliability.

The MTD 500 is distinguished by its robust construction and advanced features that enhance productivity. One of its most notable characteristics is the powerful engine, which provides high torque and enables the machine to handle heavy loads with ease. This model is equipped with a user-friendly control panel that allows operators to quickly adjust settings based on their specific needs, ensuring optimal performance in different terrains and conditions.

The MTD 510 takes the concept of efficiency a step further, incorporating advanced technologies that streamline operations. A key feature of the MTD 510 is its precision farming capabilities, which utilize GPS technology for accurate field navigation. This allows farmers to maximize their yields and minimize waste by ensuring that inputs are applied precisely where needed. The machine's onboard sensors and data analytics provide real-time feedback, helping operators make informed decisions that enhance productivity.

Both the MTD 500 and MTD 510 are designed for versatility, allowing them to be used for a variety of tasks, including tilling, plowing, and harvesting. Their adaptable attachments make it easy to switch between tasks, reducing downtime and improving overall efficiency. Additionally, these models are designed with comfort in mind, featuring ergonomic seating and advanced suspension systems that reduce operator fatigue during long working hours.

Safety is a paramount consideration in the design of the MTD 500 and 510. Both models are equipped with numerous safety features, including rollover protection systems and automatic shut-off mechanisms that protect operators in case of emergency. Furthermore, their durable build quality ensures longevity, minimizing maintenance costs and enhancing overall value for farmers.

In summary, the MTD 500 and MTD 510 represent cutting-edge solutions in agricultural technology. With their powerful engines, precision farming capabilities, versatility, and safety features, these machines are ideal for modern farmers looking to boost efficiency and productivity in their operations. As agriculture constantly evolves, the MTD 500 and 510 stand out as reliable tools that can adapt to the challenges of the industry.