Multiquip SP1E16A operation manual Belt Check, Belt Alignment and Tensioning

Page 17

inspection/setup

Check the following on the blade guard (Figure 3):

„„Ensure the capacity of the blade guard matches the diameter of your diamond blade.

„„Check that the guard is bolted firmly upon the saw frame.

„„Check that the spring tensioned front cover of the guard is firmly seated with the rear section of the guard and there are no gaps. NEVER lift the blade guard while cutting.

Ensure the v-belt cover is in place and securely fastened during operation of the saw (Figure 4).

V-Belt Check

A worn or damagedV-belt can adversely affect the performance of the saw. If a V-belt is defective or worn, replace ALL the V-belts.V-belts should always be replaced in sets.

CAUTION

NEVER attempt to check the V-belt with the engine running. Severe injury can occur. Keep fingers, hands, hair, and clothing away from all moving parts.

V-belt Alignment and Tensioning

This saw is equipped with a premium V-belt that has been aligned and tensioned by factory personnel.The V-belt must be aligned and tensioned for proper operation of the saw.

Use the following procedure to check the alignment of V-belt:

1.Remove the bolts that secure the V-belt cover (Figure 4) to the saw frame.

V-BELT COVER

Figure 4. V-Belt Cover

2.Check uniform parallelism (Figure 5) of V-belt and pulley (sheaves). Use a straight-edge or machinist's square against both pulleys and adjust both pulleys until equally aligned.

Figure 5. Pulley Alignment

3.Check V-belt tension by using a tension meter (3.0 lbs.) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/16" (5 mm).

4.DO NOT over or under tighten the V-belt. Severe damage can occur to the saw and engine crankshaft if the belt is over-tensioned. A decrease of power to the blade and poor performance will result if the belt is under-tensioned (loose on pulleys).

NOTICE

V-belt alignment must be rechecked after adjusting belt tension.

SP1E16A PAVEMENT SAW • operation manual — rev. #0 (04/14/10) — page 17

Image 17
Contents Model sp1e16a Proposition 65 warning Silicosis Warning Silicosis/Respiratory WarningsSP1E16A Pavement Saw Table of ContentsPage Training Checklist Training checklistDaily pre-operation checklist SaFeTy MeSSageS Safety InformationGeNeral SaFeTy SaW SaFeTy PoWer CorD/CaBle SaFeTy BlaDe SaFeTyEleCTriC MoTor SaFeTy TraNSporTiNg SaFeTy LiFTiNg SaFeTyENViroNMeNTal SaFeTy DeCoMiSSioNiNg Metal parts recyclingElectric Motor Specifications Specifications/dimensionsFeatures Power PlantsGeneral information Water SystemSP1E16A Controls and Components Controls and componentsInspection/setup Inspection/setupElectric Motor Guards And CoversBelt Alignment and Tensioning Belt CheckHighlights the components of a diamond blade BladesBlade Speed Blade Removal and ReplacementBlades/initial startup Cutting Depth AdjustmentInitial startup Starting the electric motorOperation/maintenance Troubleshooting Maintenance/troubleshooting electric motorChassis Lubrication BeltBlade Troubleshooting Troubleshooting sawHERE’S HOW to GET Help
Related manuals
Manual 18 pages 14.13 Kb

SP1E16A specifications

The Multiquip SP1E16A is engineered to meet the demands of professionals seeking reliable and efficient equipment for concrete and masonry projects. This innovative concrete saw combines powerful performance with advanced features that enhance productivity and precision in cutting tasks.

One of the standout features of the SP1E16A is its robust engine. Powered by a high-performance 16 horsepower engine, this saw ensures consistent power delivery, allowing users to handle various cutting applications effortlessly. Its impressive engine is complemented by a heavy-duty belt drive system, which contributes to increased reliability and reduced maintenance needs, extending the life of the saw under demanding conditions.

The SP1E16A is designed with user comfort and ease of operation in mind. It features an ergonomic handle with rubber grips that reduce vibration and provide excellent control during operation. The saw also includes an adjustable cutting depth feature, allowing for precise cuts at different depths, making it adaptable for various materials, including asphalt and concrete. The ability to adjust cutting depth not only enhances versatility but also improves the efficiency of operations.

Durability is a key characteristic of the Multiquip SP1E16A. It boasts a solid steel frame construction that withstands the rigors of job site environments. This sturdy design ensures that the saw can handle heavy use without compromising performance. Additionally, the saw is equipped with a water delivery system that minimizes dust and debris during cutting, promoting safer working conditions and improved visibility.

Another technological advancement integrated into the SP1E16A is its easy blade change system. This feature simplifies switching blades, significantly reducing downtime between cuts. Operators can swiftly adapt to different job requirements, enhancing overall productivity.

Furthermore, the SP1E16A incorporates safety mechanisms, such as blade guards and emergency stop switches, ensuring that operators can work with confidence. It also complies with industry safety standards, providing peace of mind while on the job.

In summary, the Multiquip SP1E16A is a powerful and versatile concrete saw designed for professionals seeking efficiency, durability, and user-friendly features. With its robust engine, adjustable cutting depth, ergonomic design, and enhanced safety features, the SP1E16A stands out as a reliable tool for any concrete cutting application, making it an essential addition to the toolkit of contractors and builders alike.