Cabletron Systems 6C105 Reinstalling the Fan Tray, into place, as it may damage the unit

Removing and Reinstalling the Fan Tray

Slotted Screws (2)

1	2	3	4	5	PS1	PS2
						6C405
						2016_20

Figure 3-8 Removing the Fan Tray

3.5.2Reinstalling the Fan Tray

To reinstall the fan tray, refer to Figure 3-9and proceed as follows:

1.Locate the ESD wrist strap shipped with the 6C105. Attach the ESD wrist strap to your wrist and plug the cable from the ESD wrist strap into the ESD grounding receptacle at the upper right corner of the 6C105.

2.Hold the sides of the fan tray.

3.Line up the rails on each side of the fan tray with the slot guides on the chassis.

In the following step ensure that you do not force the fan tray

!into place, as it may damage the unit.

CAUTION

6C105 Overview and Setup Guide 3-15