Cabletron Systems 6C105 setup guide Configuration Guidelines, Operating Specifications

Chapter 2: Installation Requirements and Specifications

2.2CONFIGURATION GUIDELINES

The 6C105 has 5 slots that accept interface modules. The slots are numbered 1 to 5 beginning from the left. There are two additional slots located on the far right of the chassis that are reserved for power supply modules. These slots are labeled PS1 and PS2. Cabletron Systems modules for the 6C105 are equipped with a firmware-based management tool called Local Management, which provides the capability to configure the module, and access chassis, power supply, and fan tray information. These modules are also SNMP compliant to allow remote management through SNMP software such as the Cabletron Systems SPECTRUM for Open Systems suite of management products.

2.3OPERATING SPECIFICATIONS

The following lists the specifications for the 6C105 chassis, 6C405 fan tray and the 6C205-1, 6C205-2 and 6C205-3 power supplies. Cabletron Systems reserves the right to change these specifications without notice.

Environment
Operating Temperature:	5°C to 40°C (41°F to 104°F)
Storage Temperature:	-30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity:	5% to 90% (non-condensing)
Regulatory Compliance
Safety:	UL 1950, CSA C22.2 No. 950,
	EN 60950, 73/23/EEC, and IEC 950
Electromagnetic
Compatibility (EMC):	FCC Part 15,VCCI V-3, CSA C108.8,
	EN 50082-1, 89/336/EEC, and
	EN 55022

2-2 6C105 Overview and Setup Guide