Runco VX-4C, VX-6C manual Specifications

Specifications

Specifications:	VX-4c	VX-6c
Memories:	100 Discrete memories	100 discrete memories
12V Output:	See Controller for Specifications	See Controller for Specifications
Power Requirements:	100-240V AC, 50/60 Hz, 1150W	220-240V AC, 50/60 Hz, 1700W
Operating Environment:	41°–95° F, (5°–35° C), 20%–85%	41°–95° F, (5°–35° C), 20%–85%
	Humidity (non-condensing)	Humidity (non-condensing)
Dimensions (w/out feet):	Width: 28 9/10 in. (734.00 mm)	Width: 28 9/10 in. (734.00 mm)
	Depth: 31 3/5 in. (802.60 mm)	Depth: 31 3/5 in. (802.60 mm)
	Height: 13.0 in. (330.20 mm)	Height: 13.0 in. (330.20 mm)
	Weight: 175 lbs. (79.4 kg) (without lens)	Weight: 181 lbs. (82.3 kg) (without lens)
Regulatory Approvals:	Complies with FCC, CE, C-Tick	Complies with FCC, CE, C-Tick
Limited Warranty:	Projector: (2) Two years parts and labor	Projector: (2) Two years parts and labor
	from the date of delivery to the end user.	from the date of delivery to the end user.
	Lamp Warranty: 1000 hours or (6) six	Lamp Warranty: 1000 hours or (6) six
	months, which ever comes first.	months, which ever comes first.

* ANSI Lumen Specification:

This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in RUNCO literature to allow for direct comparison with other manufacturer’s projectors. These measurements can be taken at 9,000° to 13,000° Kelvin to get expected performance data when the projector is used in professional, commercial, and industrial displays.

CSMS Home Theater Calibration ANSI Lumen Specification:

These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated to ISF specifications including setting the color temperature to 6500° K, the standard for reproducing video.

CSMS Home Theater Calibration foot-Lambert (fL) Specification:

This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image bright- ness in Digital Cinema theaters using DLP™ technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.

All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 Spectra Colorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD, and a Da-Lite 1.5 gain, 100-inch wide screen. The projector is calibrated to a color temperature of 6500° Kelvin and has a minimum of 150 hours of usage.

5-2