When the MENU button is pressed on either the remote control or the front panel, the main menu will
appear on-screen. An example of the main menu is shown above.
The active source is indicated by an arrow to the left of the source; note that in the example above,
Composite is the current source.
To select a source via the main menu,press either the up or down buttons on the remote or front panel
and highlight the desired source, and press ENTER. Otherwise, you may select a source by pressing
either the left or right arrow buttons (on the remote or front panel) when no menus are
on-screen, or by pressing one of the direct access buttons on the remote control (recommended; see page
6-8).
If pass-through is selected, note that no on-screen menus will be displayed since the signal is simply
being 'looped' directly to the output. When pass-through is the selected source, pressing MENU will auto-
matically select the last selected input before Pass-through was selected. If you wish to choose another
source, Runco recommends using the direct access buttons to select the desired source as opposed to
pressing MENU.
Aspect Ratio provides selection of one of three aspect ratios: Anamorphic, Letterbox or standard 4:3. To
select an aspect ratio via the main menu, press either the up and down buttons on the remote or front
panel, highlight ASPECTRATIO and press ENTER. The aspect ratio menu will then appear with the three
choices; highlight the desired aspect ratio with the up or down buttons and press ENTER. Otherwise, you
may select an aspect ratio by pressing either the up or down arrow buttons (on the remote or front panel)
when no menus are on-screen, or by pressing one of the direct access buttons on the remote control (rec-
ommended; see page 6-8).
Installation is where the image shift and blanking controls are located. Afull description of this menu is
on page 6-13.
NOTE: If INSTALLATION does not appear on the main menu, see page 6-13 for an explanation on how
to access the Installation menu.
MENU DESCRIPTION AND NAVIGATIONMain Menu
MAIN MENU
>COMPOSITE
S-VIDEO
COMPONENT
PASS THROUGH
ASPECT RATIO
INSTALLATION
Source selection and
picture quality adjustments
See "installation" section
Aspect ratio selection