OPERATION

 

 

Information

 

Customer Name

J. Chan

 

 

Calibrator Name

Andy S.

 

 

Date of Calibration

11/17/03

 

 

Next Calibration

11/17/04

 

 

Name

Runco VX-4c / VX-6c

 

Serial No.

123456789

Calibration Counter 5

Xenon Lamp Adjust

20

Projector Hours

152

Resolution

Digital Cinema

Memory Bank Label

 

 

Operational Parameters

 

 

 

Memory Bank No.

02

Sync

 

 

 

Sample Rate

120Mhz

Information Menu (SAMPLE)

3.8 Error Conditions

Occasionally the projector may encounter an error condition that interrupts normal operation. Such a condition can be caused by an invalid user entry, an input signal error (most common) or other system error.

If you would like to be notified on-screen of such errors, select the "Screen" option from the "Display Error Messages" pull-down list (in OSD Settings menu). If you would like to be notified via a serial communication only, select the "RS-232" option instead. To receive both notifications, select "All". To disable error messages (except for invalid user entries), select "Off".

NOTE: Error messages also always appear at the rear LCD next to the keypad.

Invalid User Entry

Any keypad entry not recognized by the projector will trigger an on-screen error message describ- ing the problem. For example, if you specify a channel number that has not been defined, the mes- sage "Invalid Channel” will appear. Or if you try to enter the wrong password, you'll see "Invalid Password". Press Enter or Exit to confirm the message and eliminate the message box.

NOTE: Displaying of "Invalid User Entry" messages cannot be disabled, even if Display Error Messages has been set to "Off".

Input Signal Error

Input signal errors messages appear when there are no menus present, and have selected an input on which the projector detects a problem. While menus remain operational and pressing any key will temporarily remove the message from the screen, you must resolve the signal problem in order to permanently eliminate the message.

NOTE: Input signal messages appear on-screen only if Display Error Messages has been set to "Screen" or "All".

3-38

Page 64
Image 64
Runco VX-6C, VX-4C manual Error Conditions, Invalid User Entry, Input Signal Error