Runco VX-6C, VX-4C manual Align zoom gear ring to access 3 screws, Rotate the lens barrel slightly

INSTALLATION AND SETUP

IF ZOOM LENS: Access to the 3 lens mount screws is likely blocked by the toothed zoom ring in front of it. First rotate the zoom ring by hand until its 3 access holes align with the screws, then insert the hex socket ball driver through the holes to loosen the screws-do not remove. See figure to the right.

Align zoom gear ring to access 3 screws

-ZOOM LENS-

STEP 3 Rotate the lens barrel slightly

Using both hands, rotate the lens barrel counter- clockwise until the screw heads align with the larg- er end of their slots on the lens.

Rotate Slightly

2-3