Pole Setup GB12BS | Multiquip GB12BW/BS/BP instruction

GLOBUG GB12BW/BS/BP LIGHTING SYSTEM — SETUP (GB12BS)

The pole clamp assembly used in this setup procedure is a dual

NOTE type clamp. One side of the clamp is for the attachment of

the main pole of the lighting system. The other side of the clamp is used for the

attachment of a support pole that is usually connected to a piece of equipment such as a paver.

Pole Setup (GB12BS)

Refer to Figure 26 for the following procedure.

1. Remove the offset pole (B) from the shipping container.

2Attached to the offset pole is a 17/19 mm open-end wrench (C). Remove the wingnut (D) securing the wrench to the offset pole and remove wrench.

3.Reinsert wingnut and washer back into offset pole so they will not get lost or misplaced.

4.Remove the two pole clamp assemblies (A) from the shipping container. Attach one pole clamp assembly (E) to the main pole (F) about 3 inches (76.2 mm) down from the main pole extension clamp. Using supplied 19 mm wrench, tighten locknut on the pole clamp assembly securely.

5.Attach the other pole clamp assembly (G) to the main pole (F) about 7.0 in. (140 mm.) down from the previous attached pole clamp assembly (E). Using the 19 mm wrench, tighten locknut on the pole clamp assembly securely.

6.To attach main pole (F) to equipment support pole (I), swing open adjustable tension plate (H) on clamp so that it can accomodate the diameter of the equipment support pole. Insert equipment support pole (I) through the two equipment support pole clamp assemblies as shown in Figure 26.

7.Once the equipment support pole (I) has been seated properly, move adjustment bolt and locknut (J) into locking position. Use the supplied 17 mm wrench, to tighten locknuts (J) on both clamps securely.

8.Place offset pole (B) with adapter clamp (K) on top of adjustable extension pole (L). Make sure that offset pole has been seated correctly.

9.Using 17 mm wrench, tighten both bolts (M) on the offset adapter clamp (K) securely.

10.Place lamp assembly (N) onto offset pole (B).Tighten T- handle bolt (O) securely.

		N
		LAMP
		ASSEMBLY
			B
			OFFSET
			POLE
		O	K
		T-HANDLE	OFFSET
LAMP P			ADAPTER
LAMP P		C	CLAMP
POWER		C	M
CABLE			M
CABLE
	REMOVE
	WRENCH	WINGNUT	ADJUSTABLE
		WINGNUT	EXTENSION L
		D	EXTENSION L
		D	POLE
	J		EXTENSION
EQUIPMENT	J		CLAMP	Q
SUPPORT	ADJUSTMENT		BOLT
	ADJUSTMENT
	BOLT AND
POLE CLAMP	BOLT AND
POLE CLAMP	LOCKNUT
	LOCKNUT
				3.0 IN.
				(76.2 MM)
LOCKNUT
		E
MAIN POLE		MAIN	POLE
MAIN POLE	H	MAIN	CLAMP	7.0 IN.
CLAMP	H	POLE	CLAMP	7.0 IN.
CLAMP		POLE	ASSY.	(140 MM)
TENSION		F	ASSY.	(140 MM)
TENSION
ADJUSTABLE	PLATE
CHANNEL	PLATE
CHANNEL
		G
POLE			POLE
POLE			CLAMP
CLAMP			CLAMP
CLAMP			ASSY.
ASSEMBLY			ASSY.
ASSEMBLY		EQUIPMENT
A		EQUIPMENT
A		SUPPORT

POLE

Figure 26. Offset Pole Assembly

GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #2 (11/03/08) — PAGE 21

GB12BW/BS/BP specifications

The Multiquip GB12BW/BS/BP is a versatile and powerful generator designed to meet diverse energy needs in various applications, from construction sites to outdoor events. Recognized for its reliability and efficiency, this generator series is popular among professionals and contractors seeking a robust power solution.

Key features of the GB12 series include its impressive output capabilities. The GB12BW, for instance, offers a continuous operation of 12 kW, making it suitable for powering multiple tools and equipment simultaneously. The machine operates with a three-phase or single-phase output, which adds versatility, catering to both larger power demands and smaller, localized needs.

One of the standout technologies within the GB12 lineup is its advanced noise reduction system. The generators are equipped with soundproof enclosures designed to minimize operational noise without sacrificing performance. This feature is particularly beneficial in noise-sensitive environments such as residential areas or during nighttime operations.

In terms of fuel efficiency, the GB12BW/BS/BP models are engineered with high-performance engines that ensure maximum runtime on a single tank of fuel. This efficiency is crucial for prolonged job sites where refueling may be inconvenient. Additionally, with lower fuel consumption rates, operators can reduce operational costs while maintaining productivity.

Durability is another hallmark of the GB12 series. Constructed with high-quality materials, these generators are built to withstand the rigors of heavy-duty use. The compact design allows for easy transportation, while the robust frame ensures stability during operation. This makes the GB12 ideal for both stationary and mobile applications.

User-friendly controls and features such as automatic voltage regulation make the GB12 series easy to operate. This technology ensures a steady power supply and protects connected equipment from voltage fluctuations, enhancing safety and equipment longevity.

Furthermore, the GB12 models come equipped with comprehensive safety features, including low oil shutdown and circuit breakers, which prevent damage and reduce the risk of accidents during operation.

In summary, the Multiquip GB12BW/BS/BP series offers a reliable, efficient, and durable power solution for various applications. With advanced technologies, enhanced fuel efficiency, and user-friendly features, it meets the demands of modern professionals seeking maximum productivity in their power generation needs.