Multiquip MP2090HP, MP2050E1 manual MP2 Masonry SAW Maintenance Gasoline Engine, Engine Maintenance

MP2 MASONRY SAW — MAINTENANCE (GASOLINE ENGINE)

Engine Maintenance

Perform engine maintenance procedures as referenced by

Table 6 below:

TABLE 6. ENGINE MAINTENANCE SCHEDULE

			FIRST	EVERY 3	EVERY 6	EVERY	EVERY
DESCRIPTION (3)	OPERATION	BEFORE	MONTH OR	MONTHS OR	MONTHS OR	YEAR OR	2 YEARS OR
			10 HRS.	25 HRS.	50 HRS.	100 HRS.	200 HRS.
Engine Oil	CHECK	X
	CHANGE		X
Air Cleaner	CHECK	X
	CHANGE			X (1)
All Nuts & Bolts	Re-tighten If	X
	Necessary
Spark Plug	CHECK-CLEAN				X
	REPLACE						X
Cooling Fins	CHECK				X
Spark Arrester	CLEAN					X
Fuel Tank	CLEAN					X
Fuel Filter	CHECK					X
Idle Speed	CHECK-ADJUST					X (2)
Valve Clearance	CHECK-ADJUST						X (2)
Fuel lines	CHECK			Every 2 years (replace if necessary) (2)

(1)Service more frequently when used in DUSTY areas.

(2)These items should be serviced by your servic dealer, unless you have the proper tools and are mechanically proficient. Refer to the HONDA shop Manual for service procedures

(3)For commercial use, log hours of operation to determine proper maintenance intervals.

NOTE

Reference manufacturer engine

manual for specific servicing instructions.

PAGE 32 — MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (03/12/13)