Rear Panel

ENGLISH

NAMES AND FUNCTIONS OF PARTS

APHONO GND Terminal

Connect the grounding wire from an analog record player here.

B PHONO Input Jacks

These jacks are for connecting to an analog record player. Both MC and MM cartridges can be used, therefore set the PHONO MC button on the front panel according to the type of cartridge you are using.

In the bi-amp mode, the R channel jack cannot be used.

C CD Input Jacks

These jacks are for connecting to the output jacks of a Super Audio CD player, CD player, etc.

In the bi-amp mode, the R channel jack cannot be used.

G PRE OUT Jacks

These jacks are for connecting to the input jacks of an- other main amplifier or active subwoofer. Output signals can be turned ON/OFF from the PRE OUT button on the front panel.

In the bi-amp mode, the signals input to the L channel are output to both output jacks.

H SPEAKER SYSTEMS Output Terminals

These terminals are for connecting a speaker system. Speaker output can be turned ON/OFF from the SPEAK- ERS button on the front panel.

In the bi-amp mode, the signals input to the L channel are output to both output terminals.

D LINE 1/2 Input Jacks

These jacks are for connecting to the output jacks of a tuner, DVD player, etc.

In the bi-amp mode, the R channel jack cannot be used.

E RECORDER 1/2 IN Jacks

These jacks are for connecting to the output jacks of a CD-R, MD deck, tape deck, etc.

In the bi-amp mode, the R channel jack cannot be used.

I REMOTE CONTROL Jacks

These jacks are for connecting components that are ca- pable of remote control (D.BUS jacks) such as a Marantz Super Audio CD Player or DVD Player. This enables these other components to be operated with the remote control- ler included with the PM-15S1.

See “REMOTE CONTROL JACKS” on pg. 20.

F RECORDER 1/2 OUT Jacks

These jacks are for connecting to the recording input jacks of a CD-R, MD deck, tape deck, etc. Output signals can be turned ON/OFF from the REC OUT button on the front panel.