ENGLISH | HOW TO USE AND SET FEATURES | |
TRIMMING | ||
|
Trimming is a feature for adjusting left and right volume balance.
Trimming is performed from the remote controller.
TRIM : This button starts trimming. When multiple PM- 15S1s are connected, this button selects the amplifier with which to perform trimming. In such case, trimming is performed in the order of the lowest to highest ID number.
EXIT : This button ends trimming.
3: This button increases the trimming level.
4 : This button decreases the trimming level.
2 : This button selects the R channel for trimming.
1 : This button selects the L channel for trimming.
ENTER: Not available for use.
OPEN/ |
| SOUND |
CLOSE |
| MODE |
PHONO | BALANCED | CD |
RECORDER 1 |
| LINE 1 |
RECORDER 2 |
| LINE 2 |
TRIM | EXIT | TONE |
| + |
|
L |
| R |
| ENTER |
|
DISPLAY | - | ATT |
VOLUME
RANDOM | SCAN | REPEAT |
TOP MENU | RETURN | MENU |
AM/A | FM/B |
|
The volume level of the left and right channels can be trimmed in 0.5 dB steps across a 0.0
1.Press the TRIM button once to access the LEVEL trimming mode.
2.The flashing “0.0” on the left indicates that trimming is activated for the left channel volume level. Press the 3 and 4 buttons to set the volume level of the left channel.
3.Press the 2 button to set the right channel volume level. When the right side “0.0” starts flashing, trimming is activated for the right channel volume level. Press the 3 and 4 buttons to set the volume level of the right channel.
4.To trim the volume level of the ID 2 (slave)
5.When finished with volume level trimming, press the EXIT button.
18