Area | Maintenance procedure | Frequency |
|
|
|
| Inspect /Tighten | Before each use |
| Nuts, Bolts, hardware | |
|
| |
|
|
|
| Visually Inspect All Welds. |
|
| Check alignment of moving parts and for | Before each use |
|
| |
| damaged or worn parts. |
|
|
|
|
| Replace Hydraulic oil |
|
| when oil viscosity and force decrease. |
|
| You need |
|
| of oil to fill up the reservoir |
|
| (after old oil is completely drained). |
|
| (See section I for instructions) | After approximately |
|
| |
| Recommended Hydraulic oil type: | 200 hours of operation |
| Shell Tellus T22 |
|
| Aral Vitam GF22 |
|
| SP Energol HCP22 |
|
| Mobil DTE11 or equivalent |
|
| Do not mix fluid brands and types! |
|
| Do not use other grade oils. |
|
|
|
|
| Clean/Lubricate | After each use |
| Machine and cart | |
|
| |
|
|
|
Maintain log splitter with care
•Keep the blade of the log splitter sharp and clean for better and safer performance
•Follow instructions for lubrication and oil change
•Keep proper oil level
•Inspect tool cord periodically and, if damaged, have it replaced by an authorized service facility
•Inspect extension cord periodically and replace, if damaged
•Keep cart dry, clean and free from oil and grease
IMPORTANT!
SKILLED AUTHORIZED PERSONNEL SHOULD PERFORM ANY MAINTENANCE
OR REPAIR OPERATION NOT DESCRIBED ABOVE.
16