Installing to a wall, Required Screws

ASSEMBLING AND PREPARING 17

Installing to a wall

Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. De- tailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.

10 cm

To install the monitor to a wall, attach a wall mount- ing bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

1 Use the screws and wall mounting bracket that comply with the VESA standard.

2 Screws which are longer than the standard length may damage the inside of the monitor.

3 A non-VESA standard screw may damage the product and cause the monitor to fall. LG Elec- tronics is not liable for any accidents relating to the use of non-standard screws.

4 VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications

5 Use it according to the VESA standard as speci- fied below.

y y784.8 mm or less

*Thickness of the wall mount plate: 2.6 mm

*Fastening screw: Diameter 4.0 mm x Pitch 0.7

mmx Length 10 mm y y787.4 mm or greater

* Use the wall mount plate and screws that con- form to the VESA standard.

VESA (A x B)	75 x 75
Stand Screw	M4 x 10
Required Screws	4

CAUTION

yyUnplug the power cord before moving or in- stalling the monitor to avoid electric shocks.

yyInstalling the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Please use the genuine LG wall mounting bracket. For more information, contact your local retail store or a qualified installer.

yyApplying excessive force when fastening screws may cause damage to the moni- tor. Damage caused in this way will not be covered by the product warranty.

yyUse the wall mounting bracket and screws that conform to the VESA standard. Dam- age caused by the use or misuse of inap- propriate components will not be covered by the product warranty.

yyScrew length from outer surface of back cover should be under 8mm.

Wall mount Pad

Back Cover