Land Pride RC5020, RCM5020 manual Storage, Wing Skid Shoe, Land Pride Touch-up Paint

Page 31

Land Pride

Table of Contents

Section 5: Maintenance & Lubrication

Wing Skid Shoe

Refer to Figure 5-10:

Replace wing skid shoes as follows:

1.Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2) and wing skid shoe (#1) as shown.

2.Plow bolts (#2) should be checked for wear and replaced if necessary.

3.Attach new skid shoe (#1) to cutter with existing 3/8” plow bolts (#2) and secure with 3/8" hex whiz nuts. Torque to 31 ft. lbs.

4.Repeat on opposite wing section.

Skid shoe

is reversible

22173

Wing Skid shoe

Figure 5-10

Storage

It is good practice to clean, inspect, service and make necessary repairs to the cutter when parking it for long periods and when parking it at the end of a working season. This will help ensure the cuter is ready for field use the next time you hook-up to it.

!DANGER!

Always disconnect main driveline from tractor PTO and secure cutter deck in the up position with solid supports before servicing the underside of the cutter.

1.Clean off any dirt and grease that may have accumulated on the cutter and moving parts. Scrape off compacted dirt from the bottom of deck and then wash surface thoroughly with a garden hose. A coating of oil may also be applied to the lower deck area to minimize oxidation.

2.See “Cutter Blade Maintenance” on page 24. Check blades and blade bolts for wear and replace if necessary.

3.Inspect for loose, damaged or worn parts and adjust or replace as needed.

4.Lubricate as noted in “Lubrication Points” starting on page 30.

5.Replace all damaged or missing decals.

6.Store cutter on a level surface in a clean, dry place. Inside storage will reduce maintenance and make for a longer cutter life.

7.Follow all unhooking instructions on page 15 when disconnecting tractor from cutter.

8.Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Aerosol Land Pride touch-up paint. They are also available in touch-up bottles with brush, quarts and gallon sizes by adding TU, QT or GL to the end of the Aerosol part number.

Land Pride Touch-up Paint

Part No.

Part Description

821-011C PAINT LP BEIGE SPRAY CAN

821-002C PAINT LP BLACK SPRAY CAN

821-054C PAINT MEDIUM RED SPRAY CAN

821-058C PAINT GREEN SPRAY CAN

2/02/09

RC5020 (540 RPM) and RCM5020 (1000 RPM) Rotary Cutters 318-474M

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Rotary Cutters Table of Contents Safety at All Times Practice Safe Maintenance Important Safety InformationUse Safety Lights and Devices Use a Safety ChainAvoid High Pressure Fluids Hazard Tire SafetyPrepare for Emergencies Wear Protective Equipment818-130C 818-240C 818-045C818-552C 818-540C 818-543C 818-840C 818-830C 818-276C818-561C 818-564C 838-094C 838-588C 818-556C818-230C 818-229CApplication Owner Assistance Using This ManualIntroduction Before You Start Pre-Assembly ChecklistAssembly and Set-up Tractor RequirementsStandard Clevis Hitch Hitch AssemblyWing Axle Assembly Hitch TypesTractor Hook-up Driveline InstallationCheck Driveline Length Hydraulic Hook-upRefer to -4 on Refer to -2 on Unhooking From the CutterRefer to -6 on Refer to -1& -2 onRefer to -1 & Figure Cutting Height AdjustmentAdjustments Center and Wing Section LevelingOperating Instructions Pre-Start ChecklistOperating Checklist Inspection ProceduresTransporting Transport LocksRefer to -1& Figure Refer to -1& -2on Field Set-upOperating Speed Wing Operating AngleGeneral Operating Instructions Driveline Turning AngleTable of Contents Wheel Options Safety Guard OptionsShredder Blade Accessory Baffle AccessoryDuplex outlets Hydraulic AccessoriesHitch Options Independently Controlled Deck WingsMaintenance & Lubrication General Maintenance InformationTractor Maintenance Cutter Blade MaintenanceLand Pride Cutter Blade Parts Drivelines With Slip ClutchesType a Clutches Clutch Run-In Clutch Disassembly, Inspection & AssemblyRefer to -7 & Table Below Refer to -8 View a Plate DisassemblyType B Clutches Clutch Run-In StepCenter Skid Shoe Plate AssemblySkid Shoe Maintenance Land Pride Skid Shoe Replacement PartsWing Skid Shoe StorageLand Pride Touch-up Paint Axle Hub Bearing Adjustable TurnbuckleLubrication Points HrsDivider Box GearboxConventional Driveline Profile Tubes Intermediate Driveline JointsConventional Driveline Joints & Shields Quantity = Coat Generously Constant Velocity Driveline Profile TubesConstant Velocity Driveline Joints & Shields Type of Lubrication Multi-purpose GreaseWing Driveline Joints & Shields Wing Driveline Profile TubesRC5020 and RCM5020 Series Specifications & CapacitiesRC5020 & RCM5020 At 2 Cutting Height Features Benefits Features and BenefitsRC5020 and RCM5020 Rotary Cutter Hinged wing sections Features and Benefits Of Optional EquipmentTroubleshooting Tire Size Inflation Tire Inflation ChartTorque Values Chart AppendixGearbox WarrantyCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA
Related manuals
Manual 162 pages 51.6 Kb

RC5020, RCM5020 specifications

The Land Pride RC5020 is a robust rotary cutter designed for agricultural and commercial applications, addressing the need for efficient vegetation management and land maintenance. This machine stands out in its class due to its exceptional durability and innovative features tailored for performance and reliability.

One of the key characteristics of the RC5020 is its heavy-duty construction. Built with a 10-gauge steel deck, it provides exceptional strength and longevity, capable of handling tough cutting conditions. The reinforced blade mounting system ensures maximum blade support, while the ΒΌ-inch thick side skirts add a layer of protection against debris and wear. This rugged structure enables users to tackle dense grass, brush, and other challenging vegetation without compromising performance.

The RC5020 is equipped with a powerful drive system that employs a smooth-running gearbox, ensuring efficient power transmission from the tractor to the cutter. This technology allows for a consistent performance and superior cutting ability, reducing downtime and maintenance needs. The machine features a quick-change blade system, enabling operators to easily replace blades when necessary, further enhancing productivity.

Versatility is another hallmark of the RC5020, as it can be operated with various tractor sizes, making it an excellent choice for both small farms and larger agricultural operations. With a cutting width of 20 feet, it efficiently covers large areas, minimizing the time needed for mowing and land clearing. The cutter also boasts an adjustable cutting height, allowing users to set the machine to their specific requirements, whether it be trimming grasses or cutting back invasive brush.

Safety features are integrated into the design of the RC5020, ensuring operator protection. These include a heavy-duty chain guard that minimizes the risk of flying debris and a unique safety latch designed to keep the cutter securely closed during transport. Additionally, the easy-access maintenance points make routine inspections and servicing quick and straightforward.

In summary, the Land Pride RC5020 rotary cutter combines robust construction with advanced technology, making it an essential tool for anyone needing effective land management. Its versatility, efficient performance, and safety features make it an ideal choice for agricultural professionals and property owners alike. Whether for mowing grass or clearing larger brush areas, the RC5020 proves to be a reliable and powerful ally in maintaining landscapes with ease and efficiency.
Top Page Image Contents