Land Pride RCM5020, RC5020 manual Transport Locks, Transporting, Refer to -1& Figure

Page 20

Table of Contents

Land Pride

Section 3: Operating Instructions

Transport Locks

IMPORTANT: Always disengage tractor’s PTO and wait for blades to stop before raising cutter wings to transport position. Drivelines and gearboxes will be damaged if cutter wings are raised while PTO is turning.

NOTE: The wings are controlled with two hydraulic lift cylinders. Be certain that the wing hydraulics are attached to the tractor and the hydraulic hoses are full of oil before proceeding.

Cutter wings will need to be raised before transporting on a roadway, through narrow gate openings and when servicing the deck underside.

Refer to Figure 3-1& Figure 3-2:

1.Disengage tractor PTO and wait for the cutter blades to come to a complete stop before raising the wings.

2.Raise the cutter wings fully up with the hydraulics.

3.Place tractor gear selector in park, shut tractor engine off, set park brake, remove switch key and dismount from tractor.

4.See Figure 3-2.Remove hairpin cotter (#1) from storage pin (#2).

5.Rotate end of transport lock bar (#3) to cylinder pin (#4) as shown in Figure 3-1.Secure with hairpin cotter (#1).

6.Repeat steps 4 and 5 for the other wing section. Cutter is now ready for transporting.

Transporting

!CAUTION!

When traveling on public roads at night or during the day, use accessory lights and devices for adequate warning to operators of other vehicles. Comply with all federal, state and local laws.

1.Select a safe ground speed when transporting from one area to another.

2.Be sure to reduce tractor ground speed when turning and leave enough clearance so the cutter does not contact obstacles such as buildings, trees or fences.

3.Always raise wings and set transport locks to keep wing decks from falling before traveling on public roadways.

4.When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely.

5.Shift tractor to a lower gear when traveling over rough or hilly terrain.

3

1

4

23592

Transport Bar, Locked Position

Figure 3-1

2 1

3

23593

Transport Bar, Storage Position

Figure 3-2

18 RC5020 (540 RPM) and RCM5020 (1000 RPM) Rotary Cutters 318-474M

2/02/09

Image 20
Contents Rotary Cutters Table of Contents Safety at All Times Important Safety Information Use Safety Lights and DevicesUse a Safety Chain Practice Safe MaintenanceTire Safety Prepare for EmergenciesWear Protective Equipment Avoid High Pressure Fluids Hazard818-045C 818-130C 818-240C818-552C 818-540C 818-543C 818-561C 818-276C818-840C 818-830C 838-094C 838-588C 818-556C 818-564C818-229C 818-230CIntroduction Using This ManualApplication Owner Assistance Pre-Assembly Checklist Assembly and Set-upTractor Requirements Before You StartHitch Assembly Wing Axle AssemblyHitch Types Standard Clevis HitchDriveline Installation Tractor Hook-upRefer to -4 on Hydraulic Hook-upCheck Driveline Length Unhooking From the Cutter Refer to -6 onRefer to -1& -2 on Refer to -2 onCutting Height Adjustment AdjustmentsCenter and Wing Section Leveling Refer to -1 & FigurePre-Start Checklist Operating ChecklistInspection Procedures Operating InstructionsRefer to -1& Figure Transport LocksTransporting Field Set-up Operating SpeedWing Operating Angle Refer to -1& -2onDriveline Turning Angle General Operating InstructionsTable of Contents Safety Guard Options Shredder Blade AccessoryBaffle Accessory Wheel OptionsHydraulic Accessories Hitch OptionsIndependently Controlled Deck Wings Duplex outletsGeneral Maintenance Information Tractor MaintenanceCutter Blade Maintenance Maintenance & LubricationDrivelines With Slip Clutches Land Pride Cutter Blade PartsRefer to -7 & Table Below Clutch Disassembly, Inspection & AssemblyType a Clutches Clutch Run-In Plate Disassembly Type B Clutches Clutch Run-InStep Refer to -8 View aPlate Assembly Skid Shoe MaintenanceLand Pride Skid Shoe Replacement Parts Center Skid ShoeLand Pride Touch-up Paint StorageWing Skid Shoe Adjustable Turnbuckle Lubrication PointsHrs Axle Hub BearingGearbox Divider BoxConventional Driveline Joints & Shields Intermediate Driveline JointsConventional Driveline Profile Tubes Constant Velocity Driveline Profile Tubes Constant Velocity Driveline Joints & ShieldsType of Lubrication Multi-purpose Grease Quantity = Coat GenerouslyWing Driveline Profile Tubes Wing Driveline Joints & ShieldsRC5020 & RCM5020 Specifications & CapacitiesRC5020 and RCM5020 Series At 2 Cutting Height RC5020 and RCM5020 Rotary Cutter Features and BenefitsFeatures Benefits Features and Benefits Of Optional Equipment Hinged wing sectionsTroubleshooting Tire Inflation Chart Torque Values ChartAppendix Tire Size InflationWarranty GearboxCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA
Related manuals
Manual 162 pages 51.6 Kb

RC5020, RCM5020 specifications

The Land Pride RC5020 is a robust rotary cutter designed for agricultural and commercial applications, addressing the need for efficient vegetation management and land maintenance. This machine stands out in its class due to its exceptional durability and innovative features tailored for performance and reliability.

One of the key characteristics of the RC5020 is its heavy-duty construction. Built with a 10-gauge steel deck, it provides exceptional strength and longevity, capable of handling tough cutting conditions. The reinforced blade mounting system ensures maximum blade support, while the ΒΌ-inch thick side skirts add a layer of protection against debris and wear. This rugged structure enables users to tackle dense grass, brush, and other challenging vegetation without compromising performance.

The RC5020 is equipped with a powerful drive system that employs a smooth-running gearbox, ensuring efficient power transmission from the tractor to the cutter. This technology allows for a consistent performance and superior cutting ability, reducing downtime and maintenance needs. The machine features a quick-change blade system, enabling operators to easily replace blades when necessary, further enhancing productivity.

Versatility is another hallmark of the RC5020, as it can be operated with various tractor sizes, making it an excellent choice for both small farms and larger agricultural operations. With a cutting width of 20 feet, it efficiently covers large areas, minimizing the time needed for mowing and land clearing. The cutter also boasts an adjustable cutting height, allowing users to set the machine to their specific requirements, whether it be trimming grasses or cutting back invasive brush.

Safety features are integrated into the design of the RC5020, ensuring operator protection. These include a heavy-duty chain guard that minimizes the risk of flying debris and a unique safety latch designed to keep the cutter securely closed during transport. Additionally, the easy-access maintenance points make routine inspections and servicing quick and straightforward.

In summary, the Land Pride RC5020 rotary cutter combines robust construction with advanced technology, making it an essential tool for anyone needing effective land management. Its versatility, efficient performance, and safety features make it an ideal choice for agricultural professionals and property owners alike. Whether for mowing grass or clearing larger brush areas, the RC5020 proves to be a reliable and powerful ally in maintaining landscapes with ease and efficiency.