Land Pride Installation Instructions for RCR1860 and RCR1872 Optional Equipment

Land Pride Table of Contents

Section 2: Optional Equipment Set-Up

Rear Chain Guard Installation

Refer to Figure 2-4:

1.Remove Rear Metal Guard. See “Rear Metal Guard Removal” on page 12.

2.Install rear chain guard (#1) with 3/8” x 3 1/2” long carriage bolts (#2), deflector spacer (#3) and 3/8” flange nuts (#4).

3.Tighten all nuts (#4) to 31 ft-lbs as indicated in the “Torque Values Chart For Common Bolt Sizes” on page 28.

21401

Rear Chain Guard

Figure 2-4

Rear Rubber Guard installation

Refer to Refer to Figure 2-5:

1.Remove Rear Metal Guard. See “Rear Metal Guard Removal” on page 12.

2.Install rear rubber guard (#1) with 3/8” x 3 1/2” long carriage bolts (#2), deflector spacer (#3) and

3/8” flange nuts (#4).

3.Tighten all 3/8” flanged nuts (#4) to 31 ft-lbs as indicated in the “Torque Values Chart For Common Bolt Sizes” on page 28.

21403

Rear Rubber Guard

Figure 2-5

12/17/07 RCR1860 and RCR1872 Series Rotary Cutters 312-849M 13