Table of Contents
Section 5: Maintenance and Lubrication
Land Pride
Lubrication
Lubrication Legend
|
|
| |||
spray lube |
|
|
| grease lube | oil lube |
|
|
|
|
|
|
50
Intervals at which lubrication is required
21416 |
24
Gauge Wheel Spindle Tube
Type of Lubrication: Grease
Quantity = 6 pumps
21416 |
21416 |
IMPORTANT: Your cutter is shipped with the gearbox vent plug with dipstick packaged in the Operator’s Manual bag and should have been installed in the gearbox by your Land Pride dealer. Please see your Land Pride dealer if the vent plug with dipstick was not included.
8
Gauge Wheel Hub
The gauge wheel hub is equipped with a relief hole located directly opposite the grease fitting. The relief hole releases pressure from inside the hub casting when it is greased. The hub should be greased until grease purges from the relief hole.
Type of Lubrication:
Quantity = Until grease purges from the relief hole
8
Gearbox
IMPORTANT: Do not overfill! Level cutter and wait for gearbox oil to cool before checking. An unlevel cutter or a gearbox with hot oil will not show correct oil level on the dipstick.
Unscrew top vent plug in gearbox to remove dipstick. Wipe oil from dipstick and screw it back in without tightening. Unscrew dipstick and check oil level mark. If low, fill through top plug hole in gearbox with EP
Take your gearbox to a Land Pride dealer if it requires service.
Type of Lubrication: Gear Lube EP
Quantity = Fill until oil reaches full mark on dipstick.
22 RCR1860 and RCR1872 Series Rotary Cutters | 12/17/07 |