Land Pride
Important Safety Information
Table of Contents
These are common practices that may or may not be applicable to the products described in this manual.
Safety at All Times
Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.
Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.
Look For The Safety Alert Symbol
The SAFETY ALERT SYMBOL indicates there is a
!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in
the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra
▲ Operator should be familiar with |
all functions of the unit. |
▲ Operate implement from the |
driver’s seat only. |
▲ Make sure all guards and shields |
are in place and secured before |
operating implement. |
▲ Do not leave tractor or implement |
unattended with engine running. |
▲ Dismounting from a moving |
tractor could cause serious injury |
or death. |
▲ Do not stand between tractor and |
implement during hitching. |
▲ Keep hands, feet, and clothing |
away from |
▲ Wear snug fitting clothing to avoid |
entanglement with moving parts. |
▲ Watch out for wires, trees, etc., |
when raising implement. Make |
sure all persons are clear of |
Be Aware of
Signal Words
A Signal word designates a degree or level of hazard seriousness. The signal words are:
!DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
!WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
!CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
working area. |
▲ Turning tractor too tight may |
cause implement to ride up on |
wheels. This could result in injury |
or equipment damage. |
For Your Protection
▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.
Shutdown and Storage
▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.
▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.
OFF
12/17/07 | RCR1860 and RCR1872 Series Rotary Cutters | 1 |