Land Pride | Table of Contents |
Section 4: Maintenance and Lubrication
Storage
At the end of the working season or when the mower will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated on the mower and any of the moving parts.
1.Clean off any dirt or grease that may have accumulated on the Grooming Mower and moving parts. Scrape off compacted dirt from the bottom of the deck and then wash the surface thoroughly with a garden hose. A coating of oil may also be applied to the lower deck area to minimize oxidation.
2.Check the blades for wear and replace if necessary, see Service Mowing Blades, this section on page 17.
3.Inspect the mower for loose, damaged or worn parts and adjust or replace as needed.
4.Lubricate as noted in the Lubrication portion of this section starting on page 20.
5.Store the Grooming Mower in a clean, dry place. The deck should be positioned on a flat surface. Ensure that the deck is stable.
6.Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Aerosol Land Pride
Land Pride Touch-up Paint
Part No. | Part Description |
Driveline Storage
Refer to Figure 4-6:
The FDR25 series mowers are equipped with a driveline hanger so that the drivelines can be stored up off the ground.
19301
Driveline Storage
Figure
10/15/07 | FDR2572 & FDR2584 Grooming Mowers | 19 |