Land Pride SC2660, SC2672 Gauge Wheel Assembly Optional, Required Tools, Assembly Instructions

Page 14

Table of Contents

Section 1: Assembly & Set-up

Gauge Wheel Assembly (Optional)

Required Tools:

1 ea. - Small hammer

2 ea. - 1/2" drift punches or alignment tools

2 ea. - 9/16" box end wrench

2 ea. - 3/4" box end wrench

1 ea. - Torque wrench with 9/16" and 3/4" sockets

Assembly Instructions:

Refer to Figure 1-6:

Land Pride

.

IMPORTANT: Do not enlarging any of the 5 bolt holes used for mounting the gauge wheel. Enlarging bolt holes can severely decrease the longevity of your gauge wheel operation.

3.Check alignment of gauge wheel front mount holes with chain guard holes. Skip to step 4 if mounting holes are in alignment. If gauge wheel mounting holes are not in alignment, loosen remaining chain guard bolts and realign chain guard as follows.

1.Remove four 3/8"-16 x 3" lg. GR5 hex head bolts (#2) in the center of the front chain guard. Keep bolts, washers and whiz nuts for reassembly of gauge wheel arm (#1).

2.Install gauge wheel deck mount (#1) by inserting 1/2" x 3 3/4" lg. GR8 bolt (#3) through 1/2" flat washer (#8), gauge wheel mounting bracket (#1) and deck tube. Secure bolt with 1/2" flat washer (#8), lock washer (#7) and hex nut (#4). Do not torque nut at this time. Finger tighten nut only.

24547

a.Realign chain guard by inserting drift punches in the outer two gauge wheel mounting holes. Tap punches in with a hammer until secure. Do not remove punches at this time.

b.Insert 3/8"-16 x 3" lg. GR5 bolts (#2) with 3/8" flat washers (#6) through the two inside holes. Secure bolts with 3/8" whiz nuts (#5). Tighten bolts to 31 ft-lbs.

c.Remove left hand drift punch and install

3/8" x 3" lg. GR5 hex bolt (#2), flat washer (#6) and whiz nut (#5). Tighten 3/8" bolt to 31 ft-lbs.

d.Remove right hand drift punch and install

3/8" x 3" lg. GR5 hex bolt (#2), flat washer (#6) and whiz nut (#5). Tighten 3/8" bolt to 31 ft-lbs.

e.Tighten remaining chain guard bolts to 31 ft-lbs.

f.Skip to step 5.

4.If gauge wheel mounting holes are in alignment, Install four 3/8" x 3" lg. GR5 hex bolts (#2), flat washers (#6) and whiz nuts (#5). Tighten 3/8" bolts to 31 ft-lbs.

5.Tighten 1/2" gauge wheel top bolt (#3) to 76 ft-lbs.

6.Attach heavy duty ratchet jack (#14) to cutter frame and to gauge wheel deck mount (#1) with 1" x 3 3/16" lg clevis pins (#11). Secure with hair pin cotters (#10).

7.Insert four 1 1/2" I.D. machine washers (#9) over gauge wheel spindle (#13).

8.Insert gauge wheel spindle (#13) through yoke in gauge wheel deck mount (#1) and 1 1/2" I.D. machine washer (#9). Secure gauge wheel with 3/8" x 2 1/2" lg. roll pin (#12).

Gauge Wheel Assembly

Figure 1-6

12 SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M

1/07/09

Image 14
Contents Rotary Cutter Table of Contents Safety at All Times Practice Safe Maintenance Use Safety Lights and DevicesUse a Safety Chain Transport Machinery SafelyWear Protective Equipment Tire SafetyPrepare for Emergencies Avoid High Pressure Fluids HazardSafety Labels 838-948C 818-556C818-555C 818-830C818-831C 818-798C 818-552CTerminology Using This ManualApplication DefinitionsSerial Number Plate Land Pride Service Department East North StreetOwner Assistance Further AssistanceSkid Steer Requirements Pre-Assembly ChecklistFloat Chain Assembly Dealer PreparationsSC2672 Vent Plug With Dipstick SC2660 Motor And Hose AssemblySC2672 Motor And Hose Assembly Vented Plug With DipstickOil LevelHitch Hook-Up Hydraulic Hose Hook-upRequired Tools Gauge Wheel Assembly OptionalAssembly Instructions Skid Shoe Assembly Optional Operator Protective Door OptionalHitch Mounted Centered Hitch PositioningHitch Mounted Offset Height Adjustment Safety Chain Deck Leveling with Optional Gauge Wheel Deck Leveling without Optional Gauge Wheel Inspection Checklist Operating InformationGeneral Operating Instructions TransportingCutting Instructions Skid Steer Operating Instructions Rotary Cutter Operating InstructionsFront Mounted Gauge Wheel Motor and Hose AssemblyGauge Wheel Assembly -004A Skid Shoe BundlesExtended Hose Kit Operator Protective DoorMaintenance Cutter Blade MaintenanceSkid Shoe Maintenance Land Pride Cutter Blade PartsHydraulic Maintenance StorageHours Lubrication PointsHours Lubrication Points Gearbox SC2672 Only HrsMotor Spindle Hub SC2660 Only SC2660 & SC2672 Skid Steer Rotary Cutter Description SC2660 SC2672Features and Benefits Features BenefitsTroubleshooting Chart Problem Cause SolutionIn-tpi Torque Values ChartAdditional Torque Values · m Ft-lb Mm x pitch32 SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

SC2672, SC2660 specifications

The Land Pride SC2660 and SC2672 are exceptional tillers designed to enhance agricultural productivity through their advanced features and technologies. These models are tailored for small to medium-sized tractors, making them versatile choices for hobby farmers and professionals alike.

One of the standout characteristics of the SC2660 and SC2672 is their robust construction. Built with high-quality materials, these tillers ensure durability and longevity, allowing them to withstand the rigors of demanding soil conditions. The two models differ primarily in width, with the SC2660 featuring a 60-inch working width, while the SC2672 offers a slightly wider 72-inch option, catering to various land preparation needs.

Both tillers are equipped with heavy-duty tines made from hardened steel, providing excellent soil penetration and thorough tilling action. The tines are designed to break up compacted soil effectively, promoting better aeration and root growth for crops. The adjustable tilling depth feature allows operators to customize the tilling process to meet specific agricultural requirements, ensuring optimal soil health and structure.

The SC2660 and SC2672 incorporate a chain drive system that delivers reliable power from the tractor to the tiller. This efficient drive mechanism reduces wear and enhances the tillers' overall performance, ensuring a smooth operation even under challenging conditions. The adjustable side skids provide further flexibility, allowing users to control the width of the tilling area, which is particularly beneficial for row cropping applications.

Another important aspect of these tillers is their ease of use. The quick-hitch compatibility allows for fast attachment and detachment, saving valuable time in the field. Additionally, the low maintenance requirements and straightforward design mean that operators can focus more on tilling and less on equipment upkeep.

In summary, the Land Pride SC2660 and SC2672 tillers offer a blend of strength, efficiency, and ease of use. Their durable build, adjustable features, and reliable performance make them an indispensable tool for any agricultural operation. Whether you're preparing your garden or cultivating larger fields, these tillers provide the versatility and reliability needed to achieve outstanding results.