Land Pride SC2672, SC2660 manual Skid Shoe Assembly Optional, Operator Protective Door Optional

Page 15

Land Pride

Table of Contents

Section 1: Assembly & Set-up

Skid Shoe Assembly (Optional)

Refer to Figure 1-7:

Cutters ordered with skid shoes are shipped loose. Install skid shoes as follows:

1.Raise the Rotary Cutter 3" or more off the ground and place support blocks under the cutter. Make sure support blocks are positioned so they will not interfere with skid shoe installation.

2.Lower cutter onto support blocks, place Skid Steer in park, set park brakes, shut Skid Steer off and remove switch key.

3.Install short skid shoe (#2) to the back left deck corner as shown with 3/8”-16 x 1 1/4 GR5 plow bolts (#2), flat washers (#6), lock washers (#5) and 3/8" lock nuts (#4). Torque lock nuts (#4) to 31 ft-lbs.

4.Install long skid shoes (#1) to the remaining three deck corners with 3/8”-16X1 1/4 GR5 plow bolts (#2), flat washers (#6), lock washers (#5) and 3/8" lock nuts (#4). Torque lock nuts (#4) to 31 ft. lbs.

5.Raise cutter up and remove support blocks.

24546

Skid Shoe Replacement

Figure 1-7

Operator Protective Door (Optional)

Refer to Figure 1-8:

!WARNING

Do not drill holes in the ROPS (Roll Over Protection System) to attach this Operator Protective Door. Drilling unapproved holes in the ROPS can weaken the structure and void its warranty.

1.Cut notches in protective door as needed to provide clearance around u-bolts and Skid Steer frame.

2.Install Operator Protective Door to the Skid Steer’s hand hold with two u-bolts (#3), flat bars (#2) and four nuts (#1) as shown. Tighten nuts to correct torque.

Skid Steer

Hand Hold

If needed, Locate & Cut

Notches in Door For

U-bolts Clearance.

Hook Elastic Tie-Down

To Skid Steer Cage To

Keep Door Closed.

If Needed, Locate

&Cut Notch in Door To Clear Skid Steer Frame.

24608

Operator Protective Door

Figure 1-8

1/07/09

SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M

13

Image 15
Contents Rotary Cutter Table of Contents Safety at All Times Transport Machinery Safely Use Safety Lights and DevicesUse a Safety Chain Practice Safe MaintenanceAvoid High Pressure Fluids Hazard Tire SafetyPrepare for Emergencies Wear Protective Equipment838-948C 818-556C Safety Labels818-830C 818-831C818-555C 818-552C 818-798CDefinitions Using This ManualApplication TerminologyFurther Assistance Land Pride Service Department East North StreetOwner Assistance Serial Number PlateDealer Preparations Pre-Assembly ChecklistFloat Chain Assembly Skid Steer RequirementsVented Plug With DipstickOil Level SC2660 Motor And Hose AssemblySC2672 Motor And Hose Assembly SC2672 Vent Plug With DipstickHydraulic Hose Hook-up Hitch Hook-UpGauge Wheel Assembly Optional Assembly InstructionsRequired Tools Operator Protective Door Optional Skid Shoe Assembly OptionalHitch Positioning Hitch Mounted OffsetHitch Mounted Centered Height Adjustment Safety Chain Deck Leveling with Optional Gauge Wheel Deck Leveling without Optional Gauge Wheel Operating Information Inspection ChecklistTransporting Cutting InstructionsGeneral Operating Instructions Rotary Cutter Operating Instructions Skid Steer Operating InstructionsSkid Shoe Bundles Motor and Hose AssemblyGauge Wheel Assembly -004A Front Mounted Gauge WheelOperator Protective Door Extended Hose KitCutter Blade Maintenance MaintenanceLand Pride Cutter Blade Parts Skid Shoe MaintenanceStorage Hydraulic MaintenanceLubrication Points Hours Lubrication PointsHours Hrs Motor Spindle Hub SC2660 OnlyGearbox SC2672 Only Description SC2660 SC2672 SC2660 & SC2672 Skid Steer Rotary CutterFeatures Benefits Features and BenefitsProblem Cause Solution Troubleshooting Chart· m Ft-lb Mm x pitch Torque Values ChartAdditional Torque Values In-tpi32 SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

SC2672, SC2660 specifications

The Land Pride SC2660 and SC2672 are exceptional tillers designed to enhance agricultural productivity through their advanced features and technologies. These models are tailored for small to medium-sized tractors, making them versatile choices for hobby farmers and professionals alike.

One of the standout characteristics of the SC2660 and SC2672 is their robust construction. Built with high-quality materials, these tillers ensure durability and longevity, allowing them to withstand the rigors of demanding soil conditions. The two models differ primarily in width, with the SC2660 featuring a 60-inch working width, while the SC2672 offers a slightly wider 72-inch option, catering to various land preparation needs.

Both tillers are equipped with heavy-duty tines made from hardened steel, providing excellent soil penetration and thorough tilling action. The tines are designed to break up compacted soil effectively, promoting better aeration and root growth for crops. The adjustable tilling depth feature allows operators to customize the tilling process to meet specific agricultural requirements, ensuring optimal soil health and structure.

The SC2660 and SC2672 incorporate a chain drive system that delivers reliable power from the tractor to the tiller. This efficient drive mechanism reduces wear and enhances the tillers' overall performance, ensuring a smooth operation even under challenging conditions. The adjustable side skids provide further flexibility, allowing users to control the width of the tilling area, which is particularly beneficial for row cropping applications.

Another important aspect of these tillers is their ease of use. The quick-hitch compatibility allows for fast attachment and detachment, saving valuable time in the field. Additionally, the low maintenance requirements and straightforward design mean that operators can focus more on tilling and less on equipment upkeep.

In summary, the Land Pride SC2660 and SC2672 tillers offer a blend of strength, efficiency, and ease of use. Their durable build, adjustable features, and reliable performance make them an indispensable tool for any agricultural operation. Whether you're preparing your garden or cultivating larger fields, these tillers provide the versatility and reliability needed to achieve outstanding results.