Land Pride SC2660, SC2672 manual Skid Shoe Maintenance, Land Pride Cutter Blade Parts

Page 26

Table of Contents

Section 5: Maintenance & Lubrication

Land Pride

Land Pride Cutter Blade Parts

Item Part No. Part Description

318-586A BLADE BOLT KIT (Contains #’s 1, 2, 5 & 6)

1802-277C BLADE BOLT 1 1/8-12 x 3 7/16 WITH KEY

2312-075D BLADE SPACER 16 GA. (.060")

2312-082D BLADE SPACER 18 GA. (.048")

2312-089D BLADE SPACER 20 GA. (.036")

2312-808C BLADE SPACER 24 GA. (.024")

3820-112C SC2660 CUTTER BLADE 1/2 x 4 x 25 CW

3820-249C SC2672 CUTTER BLADE 1/2 x 4 x 29 CW

4316-124H WELDMENT DISHPAN SC2660

4312-811H WELDMENT DISHPAN SC2672

5804-147C WASHER FLAT 1 HARD ASTMF436

6803-170C NUT HEX TOP LOCK 1 1/8-12 PLATE

Skid Shoe Maintenance

!WARNING

Excessive wear on skid shoes may cause inadequate operation of cutter and create a safety hazard!

Skid shoes should be inspected at the beginning of each cutting season and replaced when material thickness is less than 1/8" at any point. Order only genuine Land Pride parts from your local Land Pride Dealer.

Refer to Figure 5-2:

3.Remove 3/8" hex lock nuts (#4), lock washers (#5), flat washers (#6), 3/8” plow bolts (#3), three skid shoes (#1) and one skid shoe (#2) from all four deck corners.

4.Plow bolts should be checked for wear and replaced if necessary.

5.Install the new short skid shoe (#2) to the back left deck corner as shown with 3/8”-16 x 1 1/4 GR5 plow bolts (#2), flat washers (#6), lock washers (#5) and 3/8" hex lock nuts (#4). Torque lock nuts (#4) to 31 ft. lbs.

6.Install the long skid shoes (#1) to the remaining three deck corners with 3/8”-16X1 1/4 GR5 plow bolts (#2), flat washers (#6), lock washers (#5) and 3/8" hex lock nuts (#4). Torque lock nuts (#4) to 31 ft. lbs.

7.Raise cutter up and remove support blocks.

Land Pride Standard Skid Shoe Bundle 326-027A

Item Part No. Part Description

1312-602D SKID SHOE, 1/4" x 2"

2326-276D DECK RUNNER LH REAR, 1/4" x 2"

3802-466C PLOW 3/8-16X1 1/4 GR5

4803-013C NUT LOCK 3/8-16 PLT

5804-013C WASHER LOCK SPRING 3/8 PLT

6804-012C WASHER FLAT 3/8 SAE PLT

Replace skid shoes as follows:

1.Raise the Rotary Cutter 3" or more off the ground and place support blocks under the cutter. Make sure the support blocks are positioned so they will not interfere with skid shoe installation.

2.Lower cutter onto the support blocks, place Skid Steer in park, set park brakes, shut the Skid Steer off and remove switch key.

Land Pride Heavy Skid Shoe Bundle 326-028A

Item Part No.

Part Description

1

326-343D

SKID SHOE HEAVY, 3/8" x 3"

2

326-344D

SKID SHOE HEAVY SHORT, 3/8" x 3"

3

802-466C

PLOW 3/8-16X1 1/4 GR5

4

803-013C

NUT LOCK 3/8-16 PLT

5

804-013C

WASHER LOCK SPRING 3/8 PLT

6

804-012C

WASHER FLAT 3/8 SAE PLT

24546

Skid Shoe Replacement

Figure 5-2

24 SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M

1/07/09

Image 26
Contents Rotary Cutter Table of Contents Safety at All Times Practice Safe Maintenance Use Safety Lights and DevicesUse a Safety Chain Transport Machinery SafelyWear Protective Equipment Tire SafetyPrepare for Emergencies Avoid High Pressure Fluids HazardSafety Labels 838-948C 818-556C818-555C 818-830C818-831C 818-798C 818-552CTerminology Using This ManualApplication DefinitionsSerial Number Plate Land Pride Service Department East North StreetOwner Assistance Further AssistanceSkid Steer Requirements Pre-Assembly ChecklistFloat Chain Assembly Dealer PreparationsSC2672 Vent Plug With Dipstick SC2660 Motor And Hose AssemblySC2672 Motor And Hose Assembly Vented Plug With DipstickOil LevelHitch Hook-Up Hydraulic Hose Hook-upRequired Tools Gauge Wheel Assembly OptionalAssembly Instructions Skid Shoe Assembly Optional Operator Protective Door OptionalHitch Mounted Centered Hitch PositioningHitch Mounted Offset Height Adjustment Safety Chain Deck Leveling with Optional Gauge Wheel Deck Leveling without Optional Gauge Wheel Inspection Checklist Operating InformationGeneral Operating Instructions TransportingCutting Instructions Skid Steer Operating Instructions Rotary Cutter Operating InstructionsFront Mounted Gauge Wheel Motor and Hose AssemblyGauge Wheel Assembly -004A Skid Shoe BundlesExtended Hose Kit Operator Protective DoorMaintenance Cutter Blade MaintenanceSkid Shoe Maintenance Land Pride Cutter Blade PartsHydraulic Maintenance StorageHours Lubrication PointsHours Lubrication Points Gearbox SC2672 Only HrsMotor Spindle Hub SC2660 Only SC2660 & SC2672 Skid Steer Rotary Cutter Description SC2660 SC2672Features and Benefits Features BenefitsTroubleshooting Chart Problem Cause SolutionIn-tpi Torque Values ChartAdditional Torque Values · m Ft-lb Mm x pitch32 SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

SC2672, SC2660 specifications

The Land Pride SC2660 and SC2672 are exceptional tillers designed to enhance agricultural productivity through their advanced features and technologies. These models are tailored for small to medium-sized tractors, making them versatile choices for hobby farmers and professionals alike.

One of the standout characteristics of the SC2660 and SC2672 is their robust construction. Built with high-quality materials, these tillers ensure durability and longevity, allowing them to withstand the rigors of demanding soil conditions. The two models differ primarily in width, with the SC2660 featuring a 60-inch working width, while the SC2672 offers a slightly wider 72-inch option, catering to various land preparation needs.

Both tillers are equipped with heavy-duty tines made from hardened steel, providing excellent soil penetration and thorough tilling action. The tines are designed to break up compacted soil effectively, promoting better aeration and root growth for crops. The adjustable tilling depth feature allows operators to customize the tilling process to meet specific agricultural requirements, ensuring optimal soil health and structure.

The SC2660 and SC2672 incorporate a chain drive system that delivers reliable power from the tractor to the tiller. This efficient drive mechanism reduces wear and enhances the tillers' overall performance, ensuring a smooth operation even under challenging conditions. The adjustable side skids provide further flexibility, allowing users to control the width of the tilling area, which is particularly beneficial for row cropping applications.

Another important aspect of these tillers is their ease of use. The quick-hitch compatibility allows for fast attachment and detachment, saving valuable time in the field. Additionally, the low maintenance requirements and straightforward design mean that operators can focus more on tilling and less on equipment upkeep.

In summary, the Land Pride SC2660 and SC2672 tillers offer a blend of strength, efficiency, and ease of use. Their durable build, adjustable features, and reliable performance make them an indispensable tool for any agricultural operation. Whether you're preparing your garden or cultivating larger fields, these tillers provide the versatility and reliability needed to achieve outstanding results.